Epson 6100i - PowerLite XGA LCD Projector Manuel d'installation - Page 18

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Epson 6100i - PowerLite XGA LCD Projector. Epson 6100i - PowerLite XGA LCD Projector 19 pages. Release of emp ns connection for windows & mac upgrade from v2.50 to v2.51
Également pour Epson 6100i - PowerLite XGA LCD Projector : Manuel de l'utilisateur (42 pages), Manuel d'utilisation (36 pages), Spécifications (2 pages), Manuel d'utilisation (47 pages), Installation rapide (2 pages), Manuel des fonctions (5 pages), Supplement (1 pages), Liste des pièces (1 pages), Bulletin d'information sur les produits (25 pages), Bulletin d'information sur les produits (22 pages), Bulletin d'information sur les produits (28 pages), Bulletin d'information sur les produits (41 pages), Bulletin d'information sur les produits (15 pages), Bulletin d'information sur les produits (22 pages)

ELPMBUNI

Final Adjustments

With the projector secured in the mount and power on and signal supplied to the projector you can now

proceed with the final height, tilt, and roll and yaw to optimize the projected image.

The height can be adjusted by slightly loosening the two 8mm height adjustment screws and raising or

lowering the projector (Figure 14).

Once the height is achieved tighten the two screws.

To adjust the tilt angle of the projector, slightly loosen the side M8 screws and tilt to the desired angle to

the screen and firmly tighten the two M8 tilt adjustment screws (Figure 15).

If roll adjustment is needed to square the images on the screen, slightly loosen the front and rear M8

screws and adjust to the desired angle then firmly tighten the two M8 roll adjustment screws (Figure 16).

(Roll) Adjusting

Screws

Allen Wrench

Installation Manual

Wood Stud

Allen Wrench

Figure 14

Figure 15

Figure 16

Ceiling

Height Adjustable

Screws

Wood Stud

Ceiling

Tilt Adjusting Screws

Allen Wrench

Wood Stud

Ceiling

Page - 19 -