Epson 6110i - PowerLite XGA LCD Projector Manuel d'installation rapide - Page 2

Parcourez en ligne ou téléchargez le pdf Manuel d'installation rapide pour {nom_de_la_catégorie} Epson 6110i - PowerLite XGA LCD Projector. Epson 6110i - PowerLite XGA LCD Projector 7 pages. Release of emp ns connection for windows & mac upgrade from v2.50 to v2.51
Également pour Epson 6110i - PowerLite XGA LCD Projector : Manuel de l'utilisateur (42 pages), Manuel d'utilisation (36 pages), Manuel de l'utilisateur (17 pages), Manuel d'utilisation (47 pages), Spécifications (2 pages), Manuel complémentaire (1 pages), Manuel de l'utilisateur (1 pages), Liste des pièces (1 pages), Déclaration de conformité (4 pages), Bulletin d'information sur les produits (25 pages), Bulletin d'information sur les produits (22 pages), Bulletin d'information sur les produits (28 pages), Bulletin d'information sur les produits (41 pages), Bulletin d'information sur les produits (15 pages), Bulletin d'information sur les produits (22 pages)

Epson 6110i - PowerLite XGA LCD Projector Manuel d'installation rapide
2
Connect your video source
Connect the projector to a computer or video source using any of the available
connections shown below.
Check the connectors on your video equipment. If more than one
connection is available, choose the one that provides the best quality.
The projector connectors from highest to lowest quality are
Computer (Component Video), S-Video, and Video.
A computer cable is included. You can purchase optional video and
audio cables through Epson
You can connect up to 4 video devices and use the remote control to
switch between them.
S-Video
cable
(optional)
You can connect an external monitor to watch the display on your
NOTE
computer monitor while watching the projection screen (when the
computer cable is connected to the Computer1 port).
To enhance the sound in your presentation, you can connect
external speakers.
You can also control the projector over a network and monitor its
status. See the User's Guide on your CD-ROM for instructions.
3

Set up the remote control

1
Remove the battery cover.
2
Insert the batteries.
3
Replace the battery cover.
The remote control is ready for use.
®
or an electronics store.
RCA video cable
(composite video)
(optional)
L-Audio-R
ports
Component
video to
VGA cable
(optional)
Audio1 and Audio2 ports
Computer
cable
(included)