Epson 745c - PowerLite XGA LCD Projector Manuel - Page 18

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Epson 745c - PowerLite XGA LCD Projector. Epson 745c - PowerLite XGA LCD Projector 24 pages. Release of check tool for network projectors v1.00 for windows
Également pour Epson 745c - PowerLite XGA LCD Projector : Manuel de l'utilisateur (42 pages), Manuel d'utilisation (36 pages), Manuel d'installation rapide (2 pages), Manuel d'utilisation (47 pages), Liste des pièces (1 pages), Bulletin d'information sur les produits (30 pages), Installation rapide (4 pages), Manuel d'installation (19 pages), Manuel de l'utilisateur (1 pages), Fiche technique (7 pages), Bulletin d'information sur les produits (25 pages), Bulletin d'information sur les produits (38 pages), Bulletin d'information sur les produits (12 pages), Bulletin d'information sur les produits (42 pages), Bulletin d'information sur les produits (22 pages), Bulletin d'information sur les produits (28 pages), Bulletin d'information sur les produits (41 pages), Bulletin d'information sur les produits (34 pages), Bulletin d'information sur les produits (38 pages), Bulletin d'information sur les produits (28 pages), Bulletin d'information sur les produits (15 pages), Bulletin d'information sur les produits (22 pages), Installation rapide (2 pages)

Epson 745c - PowerLite XGA LCD Projector Manuel
Epson PowerLite 745c Projector
Managing Projectors from a Remote
Computer
The software included with your projector lets you monitor
and control projector(s) from a remote computer. These
features are intended for use by network administrators.
❏ Use EMP Monitor to see your projectors' status, switch
image sources, and control basic settings.
❏ Use the mail notification function to receive e-mail alerts
about possible problems.
❏ Use a network management utility running SNMP, such as
HP OpenView,
to manage your facility's equipment from
a pre-existing system.
Make sure you have installed the EMP Monitor software
(included on the projector's CD-ROM) on the computer you
want to use to monitor your projectors. (See the User's Guide
for instructions.)
Note:
Your computer must be running Microsoft Windows XP, 2000,
Me or 98SE.

Opening and Closing EMP Monitor

To start EMP Monitor, click
Programs > EPSON Projector > EMP Monitor
If you've added the program to the Startup programs folder, it
may already be open. If so, click the icon in the system tray on
the lower-right corner of your screen to display the EMP
Monitor window:
To close EMP Monitor, right-click the program icon shown
above, then select
.
Exit
18
Epson PowerLite 745c Projector
-
or
Start > Programs
All
.
Click here to start EMP Monitor
Registering Projectors in EMP Monitor
Before you can monitor a projector, you have to register it.
Follow these steps:
1. Open EMP Monitor. You see this screen:
Click here
2. Click
Register projector
3. Click
detect to locate projectors currently operating
Auto
on the network. Or click
the projector's name and network address.
Note:
If Auto detect fails to find the projector, your projector may
not be connected or configured correctly for the network.
Any projectors found on the network are listed:
4. Select each projector you want to add by clicking its name
and clicking
Add
8/04
. You see this screen:
Manual registration
. When you're done, click
Click here
and enter
Click here
.
Close