Epson 7850p - PowerLite XGA LCD Projector Manuel d'information sur les produits - Page 7

Imprimer la page

Epson 7850p - PowerLite XGA LCD Projector Manuel d'information sur les produits

EPSON PowerLite 7850p Projector

2. Press the corresponding

control to switch to the desired source. Or press the

button to exit the preview screen without switching sources.

Note: A red border surrounds the preview window for the

currently selected source. You can use the

on the remote control to select a different source, and then

press

to display it.

Enter

What To Do If You See a Blank Screen

If you see a blank screen or a blue screen with the message

No Signal after turning on your computer or video source,

try the following:

❏ Make sure the cables are connected correctly.

❏ Make sure the power light is green and not flashing and the

lens cover is off.

❏ Try restarting your computer.

❏ Press the correct

Source

on the remote control. (Allow a few seconds for the

projector to sync up after pressing the button.)

If you're using a PC laptop:

❏ Hold down the Fn key and press the function key that lets

you display on an external monitor. It may have an icon

such as

or it may be labeled

seconds for the projector to sync up after pressing it. Check

your laptop's manual or online help for details.

On most systems, the

toggle between the LCD screen and the projector, or

display on both at the same time.

❏ Depending on your computer's video card, you might need

to use the Display utility in the Windows

make sure that both the LCD screen and external monitor

port are enabled. See your computer's documentation or

online help for details.

If you're using a laptop with Macintosh OS X:

You may need to set up your system to display on the

projector screen as well as the LCD screen. Follow these steps:

1. From the Apple menu, select

select

Displays

2. Make sure the

VGA Display

3. Click the

tab.

Arrange

EPSON PowerLite 7850p Projector

button on the remote

Source

pointer button

button on top of the projector or

. Allow a few

CRT/LCD

key lets you

CRT/LCD

Control Panel to

System Preferences

dialog box is selected.

ESC

Make sure

Mirror Displays

is checked

4. Make sure the

If you're using a laptop with Macintosh

You may need to set up your system to display on the

projector screen as well as the LCD screen. Follow these steps:

1. From the Apple menu, select

Monitors

2. Click the

Click here

Drag one monitor

icon on top of the

other

3. Drag one monitor icon on top of the other.

If the

Arrange

1. Click the

Click here

, then

2. Select a Simulscan resolution as shown. (Allow a few

seconds for the projector to sync up.)

6/03

checkbox is selected.

Mirror Displays

Control Panels

Monitors and Sound

icon.

Arrange

option isn't available, do the following:

icon if necessary.

Monitor

Select the

VGA Display

dialog box

OS 9.x:

, then click

Select a

Simulscan

resolution