Philips 1445RS/05 Manuel de l'utilisateur - Page 2

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Philips 1445RS/05. Philips 1445RS/05 17 pages. Color televisio

Imprimer la page

1. Hotel Mode

Setting up your television

Please read the safety and care information at the back of this booklet before you connect

this television to the electricity supply .

Moving the television

The earth's magnetic field can affect the colour quality of the picture, but your television has a built-in

demagnetisation system to prevent this. The system works whenever the mains power is switched on while the

television is cool. So if you have to move the television, leave it for at least 15 minutes before you switch it on.

Make the connections

The aerial

Connect the aerial lead to the aerial socket at the back of the television (see diagram 1).

We have supplied a loop-aerial which fits in a hole at the back of the television (see

diagram 1A). If reception conditions are good enough you may be able to get

high-quality picture and sound by using the loop-aerial. You will need a good-quality

aerial to receive Teletext on model 1465TS.

Other equipment

If you have a video recorder, you will need to connect the aerial lead to the video

recorder. Then, connect the aerial output lead from the video recorder to the television

aerial socket. There is information about connecting aerials and other equipment in

'How to connect scart cables' on page 8-9.

The scart (AV) socket

This television has a special socket called 'scart' (AV). This allows you to connect your

television to other equipment. You don't have to use this straight away, but using scart

cables gives you the best picture and sound quality and can get rid of picture

interference. If you have other equipment with scart sockets, please read 'How to

connect scart cables' on page 8-9.

Putting the batteries in the remote control

• Slide your thumbnail under the edge of the battery cover where it says 'open' and

press with your thumbnail while lifting the cover up (see diagram 2).

• Put in the two batteries that came with your television (size AAA or LR3)

• Make sure that the (+) and (-) marks on the batteries agree with the (+) and (-)

marks inside the battery compartment.

• Replace the cover by sliding it into position and pressing down at the end marked

'open'.

• Throw away old the batteries carefully. Do not put them on a fire.

Pow er suppl y

Plug your television into the mains supply (220 to 240 volts, 50Hz).