U
sing the remote contro l
1
If this is your first time using the remote, install the batteries.
2
Slide the remote control's
ON/OFF switch to turn it on.
You can use the remote control to control the projector.
Zoom in on part of
the projected image
Turn off image
and sound
Navigate projector
menus
Fine-tune the Focus
Control projector
volume
NOTE:
With an optional USB cable, you can use the remote as a
wireless mouse. For more information, see your User's Guide.
W
here to get help
Telephone Support Services
To use the Epson PrivateLine
®
and enter the PIN on the Epson PrivateLine Support card included in
your Start Here kit. This service is available 6
Monday through Friday, for the duration of your warranty period.
You may also speak with a projector support specialist by dialing
one of these numbers:
U.S.:
(562) 276-4394, 6
AM
Monday through Friday
Canada: (905) 709-3839, 6
AM
Monday through Friday
Toll or long distance charges may apply.
Electronic Support Services
Epson provides technical assistance through electronic support
services 24 hours a day at http://support.epson.com. For tips,
templates, and training for developing successful presentations
go to http://www.presentersonline.com.
Epson is a registered trademark of Seiko Epson Corporation. PowerLite and PrivateLine are registered trademarks of Epson America, Inc.
General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective owners.
Epson disclaims any and all rights in those marks. © 2004 Epson America, Inc. 7/04
Printed in XXX
Turn projector
on and off
Freeze the projector display
(presentation and sound
continue unless stopped)
Choose which source
to display
Optimize the computer image
Support service, call (800) 637-7661
to 6
, Pacific Time,
AM
PM
to 6
, Pacific Time,
PM
to 6
, Pacific Time,
PM
Epson PowerLite 830p
T
roubleshooting
If you see a blank screen...
If you see a blank screen or the No signal message after turning on
your notebook, check the following:
Make sure the Power light on the projector is green and not flashing,
and the lens cover is off.
Press the Computer/Component button on the projector (or the
Comp1 button the remote control) to select Computer1 as the
image source.
If you're using a Windows
keyboard that lets you display on an external monitor. It may be
labelled CRT/LCD or have an icon such as
hold down the Fn key while pressing it. Allow a few seconds for
the projector to sync up after changing the setting.
If the projector and notebook
don't display the same image...
If your image displays either on the projector or notebook, but not on
both, check the following:
Windows
Try using the CRT/LCD or
this key lets you toggle between the LCD screen and the projector,
or display on both at the same time.
If that doesn't work, check your monitor settings to make sure both the
LCD screen and the external monitor port are enabled.
1.
From the Windows Control Panel, open the Display utility.
2.
In the Display Properties dialog box, click the
Settings tab, then click Advanced.
3.
The method for adjusting the setting varies;
you may have to click a Monitor tab, then
make sure the external Monitor port is set
as your primary display and/or enabled.
See your notebook's manual or online help
for details.
®
Macintosh
OS X
®
1.
From the Apple
menu, select System
Preferences, then select Displays.
2.
Select the Color LCD dialog box.
3.
Click the Arrangement (or Arrange) tab
and click Mirror Displays.
Macintosh OS 9.x or earlier
1.
From the Apple menu, select
Control Panels, then click Monitors
or Monitors and Sound.
2.
Click the Arrange icon.
3.
Drag one monitor icon
on top of the other.
If the Arrange option isn't available,
click the Monitor icon and select a
Simulscan resolution.
Quick Setup
®
notebook, press the function key on your
. You may have to
key as described above. On most systems,
CPD-18224R1
Imprimer la page