Epson 9800 - Stylus Pro Color Inkjet Printer Manuel de déballage et d'installation - Page 10

Parcourez en ligne ou téléchargez le pdf Manuel de déballage et d'installation pour {nom_de_la_catégorie} Epson 9800 - Stylus Pro Color Inkjet Printer. Epson 9800 - Stylus Pro Color Inkjet Printer 27 pages. Stylus pro 800 series
Également pour Epson 9800 - Stylus Pro Color Inkjet Printer : Brochure & Specs (8 pages), Manuel de démarrage (10 pages), Manuel de l'utilisateur (11 pages), Manuel de référence rapide (12 pages), Garantie limitée (12 pages), Brochure & Specs (8 pages), Brochure & Specs (6 pages), Brochure & Specs (16 pages), Feuille d'avis (4 pages)

2. Turning the stitch side downward, spread the

paper basket on the floor.

3. Holding the rear shaft, pass it under the

horizontal struts.

4. Rotate the rear paper basket joints to enfold

the bar that is not attached to the fabric. Insert

the stanchion pins into the holes on the base

upright left and right, as shown.

5. Slide out the upper basket hooks to their full

length.

6. Hook both ends of the center shaft (O) on the

upper basket hooks.

7. Insert the lower shafts into the holes on the

bottom of the base unit as shown below.

8. Stand the lower shafts.

9. As shown in the figure, hook the paper feed

support film on the shaft of the paper basket

(the movable hook (a) on the intermediate

shaft and the stability hook (b) on the back

shaft), so that it hangs along the inner surface

of the basket.