Epson ActionNote 866C Manuel de l'utilisateur - Page 25

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Epson ActionNote 866C. Epson ActionNote 866C 47 pages. Product support bulletin(s)
Également pour Epson ActionNote 866C : Manuel d'information sur les produits (11 pages), Bulletin d'information sur les produits (3 pages), Instructions de programmation (1 pages)

Network card configuration options

Option

Memory Address 1 *

Memory Address 2*

Base l/O Address*

IRQ Line*

Fast Token Ring Speed

* Do not change the displayed values for these options unless you have a

specific reason.

Once you have changed your configuration, make sure you

save the settings by selecting

screen. When you exit the Card Lite Configuration Utility (from

the File menu), the program prompts you to allow it to save the

changes to the CARDLITE.INI and CONFIG.SYS files.

Changing the Card Insertion Parameters

Normally, your system beeps when you insert or remove a

card or when you have a configuration conflict. When you

select the Beeps option from the Settings pull-down menu,

you see the Beep Settings configuration screen, which allows

you to specify beep criteria for your system.

Note

If you change these parameters, make sure you save the

settings by selecting

When you exit the CardLite Configuration Utility (from the

File menu), the program prompts you to save the changes to

the CARDLITE.INI and CONFIG.SYS files.

Function

Identifies the memory address for the first PC

card.

Identifies the memory address for the second

PC card.

Identifies the address used by the PC LAN cards.

Sets the IRQ line used by the PC LAN cards. This

can be a value between 0 and 15.

Enables Fast Token Ring Speed if your PC LAN

cards support it. Refer to your card

documentation for more information.

from the configuration

from the configuration screen.

Using CardLite

2 - 5