Epson ActionNote 866C Manuel de l'utilisateur - Page 28

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Epson ActionNote 866C. Epson ActionNote 866C 47 pages. Product support bulletin(s)
Également pour Epson ActionNote 866C : Manuel d'information sur les produits (11 pages), Bulletin d'information sur les produits (3 pages), Instructions de programmation (1 pages)

Using the CARDINFO Command

The CARDINFO command provides these functions:

Identifies the types of PC cards inserted in the PCMCIA

slots

Identifies I/O ports, IRQs, and memory areas used by

PC cards so that you can ensure that two components do

not use the same resources

Turns power to the PCMCIA slots on or off

Displays manufacturer and product information about

PC cards

Identifies the drive letter for an ATA hard disk or ATA

flash card

Displays the most recent error for an inserted card.

You can run CARDINFO from the MS-DOS command line.

Unless you add the directory containing CardLite to the path

command in your AUTOEXEC.BAT file, you need to change to

your CardLite directory to run the CARDINFO command.

When you type CARDINFO without any switches at the

MS-DOS command line, the program creates a CARDID.INI

file and displays the following information for any cards

installed in the PCMCIA slots:

C a r d t y p e

M a n u f a c t u r e r

Product name.

This program also identifies empty slots.

2-8

Using CardLite