Epson EMP Monitor Manuel d'utilisation - Page 20
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Epson EMP Monitor. Epson EMP Monitor 37 pages. Emp monitor for projectors
Également pour Epson EMP Monitor : Manuel d'utilisation (11 pages), Manuel d'utilisation (12 pages), Manuel de l'utilisateur (42 pages), Manuel d'utilisation (34 pages), Manuel d'utilisation (14 pages)
Imprimer la page
Monitoring window layout
The icon patterns and their meanings are explained below.
Group
No warnings or problems
All projectors in the group are normal.
Warning or problem
A projector in the group has a warning or problem status.
Notification
A projector requiring immediate attention has been detected within the
group.
Monitoring disabled
The projector is not being monitored. If you right-click the icon and select
Monitoring enabled, the projector will be added to the projectors that are
being monitored.
Data being updated
Projector
No warnings or problems
Warning or problem
Notification
Monitoring disabled
Data being updated
Network error (monitor password authentication error)
No Monitor Password was entered when the projector was
registered, or an incorrect Monitor Password was entered. s p.11,
p.13,
p.14
*1
Projector
Network error (TCP connection error)
Network error (ESC/VP.net communication error)
*1 When Temperature level display group view is set to On at Environment
setup in the Tool menu, an icon indicating the internal temperature of the
projector will be displayed on top of the projector icon. The default
setting is Off. As you can get an idea of how the temperature inside the
projector is increasing when the temperature level is displayed, you can
make improvements to the projector's operating environment before a high
internal temperature error or high-temperature warning occur. s
*2 Check the following items.
- Check that the projector's power is turned on.
- Check that the LAN cable is connected.
- Check that Network Monitoring is set to ON or Standby Mode is set to
Network ON in the projector's configuration menu.
*3 Check that the projector has been correctly connected to the network.
The projector information that is generated when a problem is
q
detected is stored until EMP Monitor is closed. EMP Monitor
displays will not be updated automatically even if the projector
status returns to normal. Click "Refresh" in the main window to
update the status.
Using the icons in Grouping view
The following icon operations can be carried out in Grouping view.
20
*2
*3
p.24