Epson EMP Monitor Manuel d'utilisation - Page 7

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Epson EMP Monitor. Epson EMP Monitor 37 pages. Emp monitor for projectors
Également pour Epson EMP Monitor : Manuel d'utilisation (11 pages), Manuel d'utilisation (12 pages), Manuel de l'utilisateur (42 pages), Manuel d'utilisation (34 pages), Manuel d'utilisation (14 pages)

Operating environment

• Even after EMP Monitor has been uninstalled, the settings and log

information will remain on the hard disk. If this information is no

longer required, you may delete the EMP Monitor V4.30 folder.

Provided the default settings were used at installation, this folder can

be found at:"C:\Users\(User Name)\AppData\Local\VirtualStore\Program

Files\EPSON Projector\EMP Monitor V4.30"

Before starting operations

Check the following points before starting up EMP Monitor.

• EMP Monitor must be installed on the computer to be used for

monitoring and control.

• The computer and the projectors must be connected to the network.

• If using Windows 2000/Windows NT4.0/Windows XP/Windows Vista,

the computer must be started up in Administrator mode.

• Depending on the projector model, a commercially-available serial

TCP/IP conversion adapter and a connection cable are required in

order to use EMP Monitor.

Make the settings for the serial

connecting to the projector.

Projector's User's Guide "Standby Mode"

TCP/IP conversion adapter before