Dimplex BF392SD Manuel d'installation - Page 2

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Dimplex BF392SD. Dimplex BF392SD 4 pages. Built in 2 sided fireplace
Également pour Dimplex BF392SD : Manuel du propriétaire (12 pages), Manuel d'entretien (13 pages), Manuel de dépannage (4 pages), Manuel du propriétaire (14 pages)

SECTION A: FRAMING

Rough-in framing dimensions

Firebox dimensions

This fireplace is a zero clearance design. Combustibles may be installed to the edge of the unit. Four nailing

flanges on the sides of the unit are provided to facilitate installation. Insulation and vapor barrier should be placed

a minimum of 2 inches from the unit.

SECTION B: RECOMMENDED POWER SUPPLY WIRE SPECIFICATIONS

For 120 volt installations use two conductor, non-metallic sheath cable with ground wire for the

incoming power supply on fireplace inserts. Use the appropriate wire to meet local and

national electrical codes for rated power consumption.

Use appropriate wire to meet local and national electrical codes for rated power consumption.

RECOMMENDED WIRE AND FUSING REQUIREMENTS

VOLTS

WIRE GAUGE

FUSE RATING

120 VOLT

14 GAUGE

15 AMP