ARIELTECH FTEC Series Instructions d'installation et de montage
Parcourez en ligne ou téléchargez le pdf Instructions d'installation et de montage pour {nom_de_la_catégorie} ARIELTECH FTEC Series. ARIELTECH FTEC Series 2 pages. Fan filter and exhaust filter
Imprimer la pageFan Filter and Exhaust Filter
FTEC series
Installation and Mounting Instructions
CAUTION:
●
FTEC series must only be installed by qualified specialists in observation of the
respective national power−supply guidelines.
●
All safety measures and the electrical contact protection in the connection area
is to be ensured through proper installation.
●
The technical specifications on the name plate must be observed.
●
Operational reliability of the Fan Filter is to be insured by an operation test.
●
FTEC series must not be repaired.
●
FTEC series must not be blocked.
FEATURES & INSTRUCTIONS:
●
FTEC series protection types include NEMA 12 (IP 54 or IP 55) and
NEMA 3R (IP 55).
FM-4 series filter mat guarantees IP54 Ingress Protection.
●
●
FM-5 series filter mat guarantees IP55 Ingress Protection.
●
To maintain a high performance of all filter media, it is necessary to
periodically check the filter mats.
Both FM-4 and FM-5 series are washable to a limited extent.
●
▪
The filter mats can be easily cleaned by washing, beating, or
spraying, and then re-used. Even after washing, the filter mats remain
dimensionally stable, thus retaining their technical filtering properties.
The fire class remains unaltered.
▪
NOTE: Do not rub or wring out.
●
Fan Filters and Exhaust Filters snap into the mounting cut out without using
any screws.
MODEL NO.
A mm
3.6" -0/+0.04"
FTEC 10
93 -0/+1
5.04" ±0.02"
FTEC 16
128 ±0.5
6.89" ±0.02"
FTEC 20
175 ±0.5
8.98" ±0.02"
FTEC 26
228 ±0.5
11.54" ±0.02"
FTEC 32
293 ±0.5
A Inch
Prepare cut-out hole per
installation cut out table.
Place fan filter or exhaust filter into
cut-out hole and push the filter so
that the filter bottom clamp is fixed
into enclosure cut-out.
Snap into panel cut-out by using
a proper screwdriver to click all
clips gently into enclosure cut-out.
Ariel Technology Inc.
www.arieltech.ca
Open the filter face by using a
screwdriver and remove filter mat.
Insert bottom clip first.
Place filter mat inside filter housing
then insert filter louvre into filter
body and ensure that they snap
tightly together.
1-855-895-5900