Epson PowerLite 1825 Manuel de l'utilisateur - Page 5

Imprimer la page

Epson PowerLite 1825 Manuel de l'utilisateur

The Projector and Notebook Don't Display the

Same Image

If you're projecting from a notebook, and you can't see your

image on the projection screen and on your computer at the

same time, follow these guidelines:

If you're using a PC notebook:

❏ On most systems, there's a function key that lets you toggle

between the LCD screen and the projector, or display on

both at the same time. It may be labeled

an icon such as

. You may have to hold down the

key while pressing it. Allow a few seconds for the projector

to sync up after changing the setting.

❏ If the function key doesn't permit you to display

simultaneously on both screens, you should check your

monitor settings to make sure both the LCD screen and the

external monitor port are enabled.

From the Control Panel, open the

Display Properties dialog box, click the

click

. The method for adjusting the settings

Advanced

varies by brand; you may need to click a

make sure the external Monitor port is set as your primary

display and/or enabled. See your computer's documentation

or online help for details.

If you're using Mac OS X:

You may need to set up your system to display on the projector

screen as well as the LCD screen. Follow these steps:

1. From the Apple

menu, select

click

Displays.

2. Select

VGA Display

, and make sure

Arrangement

Adjusting the Image

Once you see your image, you may need to make certain

adjustments, as described in this section.

CRT/LCD

utility. In the

Display

tab, then

Settings

tab, then

Monitor

System Preferences

, click

Color LCD

Arrange

is checked.

Mirror Displays

Adjusting the Height of the Image

If the image is too low on the screen, you can use the front

adjustable foot to raise it.

1. Stand behind the projector. Press the foot release lever and

lift the front of the projector.

or have

2. Once the image is positioned where you want it, release the

lever to lock the foot in position.

3. If necessary, you can fine-tune the height or level the image

by turning any of the projector's adjustable feet.

, then

Raising the projector causes the image to distort or "keystone,"

but you can correct the shape as described on page 6.

Focusing and Zooming the Image

To sharpen the image, turn the focus ring on the projector.

To reduce or enlarge the image, turn the zoom ring on the

projector.

If the image still isn't large enough, you may need to move the

projector farther away from the screen. You can also use the

buttons on the remote control to zoom in on a portion

E-Zoom

of the image. See page 8 for instructions.

2/08

Focus

PowerLite 1825

Zoom