Epson PowerLite 737c Informations sur le produit - Page 12

Parcourez en ligne ou téléchargez le pdf Informations sur le produit pour {nom_de_la_catégorie} Epson PowerLite 737c. Epson PowerLite 737c 24 pages. Release of check tool for network projectors v1.00 for windows
Également pour Epson PowerLite 737c : Manuel de l'utilisateur (42 pages), Manuel d'utilisation (36 pages), Manuel d'installation rapide (2 pages), Manuel d'utilisation (47 pages), Liste des pièces (1 pages), Bulletin d'information sur les produits (30 pages), Manuel d'installation (19 pages), Manuel de l'utilisateur (1 pages), Bulletin d'information sur les produits (25 pages), Bulletin d'information sur les produits (38 pages), Bulletin d'information sur les produits (12 pages), Bulletin d'information sur les produits (42 pages), Bulletin d'information sur les produits (22 pages), Bulletin d'information sur les produits (28 pages), Bulletin d'information sur les produits (41 pages), Bulletin d'information sur les produits (34 pages), Bulletin d'information sur les produits (38 pages), Bulletin d'information sur les produits (28 pages), Bulletin d'information sur les produits (15 pages), Bulletin d'information sur les produits (22 pages), Installation rapide (2 pages)

Imprimer la page
Epson PowerLite 737c Informations sur le produit
Epson PowerLite 737c Projector
6. Select the appropriate settings for your mode:
ESSID
Password for WEB
control
Projector keyword
DHCP (access point
mode only)
IP address (access
point mode only)
Subnet mask.
(access point mode
only)
Gateway address
(access point mode
only)
7. When done making settings, highlight the
top of the screen. Then press
button again and press
Enter
Network Screen.
12
Epson PowerLite 737c Projector
-
Ad hoc: Enter an ESSID in the ESSID
textbox.
Access point: Enter an ESSID, which
is the SSID name of your access point
or the name of your AirPort network.
(The name of your AirPort network
may be different from that of your
AirPort base station; select your base
station in the AirPort Admin utility and
click
to check the name of
Configure
your network.)
Note that the ESSID is case-sensitive.
If you want to create a password for
an internal web page, you can enter
up to 8 alphanumeric characters.
Turn this option on if you want to set
up a security keyword so that only
people in the same room as the
projector can access it. When you
connect to the projector wirelessly, it
displays a four-digit randomized
keyword on the screen that you need
to enter when prompted.
If your access point assigns IP
addresses automatically, turn this
option on. Otherwise, turn it off and
assign an IP address, subnet mask,
and gateway address manually.
Enter the IP address you want to
assign the projector. It must be
formatted like other addresses on the
network; usually the first three
sections match the access point's IP
address. The last section should be
unique.
Enter a subnet mask formatted like
other subnet masks on your network.
Enter the IP address that was
assigned to your access point or
AirPort base station when it was set
up. If you don't know the address, see
"Checking the Gateway (Access
Point's) IP Address" on page 14.
button at the
OK
. Highlight the
Enter
OK
to return to the main EasyMP
Configuring the Network Settings for Windows
Before connecting to the projector wirelessly, make sure your
computer is configured correctly. Also, make sure that the
Internet Connection Firewall is disabled. (See your Windows
online help system for details.)
Note:
Depending on your computer's wireless network adapter card,
the dialog boxes you see may be different than those shown in
this section.
1. Access your wireless network Properties window. For
example, in Windows XP click
Network and Internet Connections
the
Network Connections
this:
2. Right-click the
Wireless Network Connection
select Properties. You see a screen like this:
2/05
Start > Control Panel >
. Then double-click
icon. You see a screen similar to
Right-click and select Properties
icon and
Click here