Toshiba 20V300H Manuel du propriétaire - Page 16

Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Toshiba 20V300H. Toshiba 20V300H 28 pages. Lcd color tv

Imprimer la page
Toshiba 20V300H Manuel du propriétaire
3
Press t or s to select an item you want
to adjust, then press 1 or 2 to adjust the
settings as required.
Contrast
1
Selection
Back light
darker
Contrast
lower
Brightness
darker
Color
paler
Tint
reddish
Sharpness
softer
Notes:
• The Tint may only be adjusted on a tape which
has been recorded and played back on an
NTSC VCR.
• In the PC input mode Color, Tint and
Sharpness modes are not available.
Activating the DNR (Digital Noise
Reduction)
If the receiving signal is weak and the picture is
blurry, the picture may be improved when using
this function.
1
From the Picture settings menu, press t or
s to select DNR.
2
Press 1 or 2 to select On or Off.
Picture settings
DNR
Notes:
• This function is available for 480i and 576i
signals.
• In the PC input mode and component 720p,
1080i input mode, DNR modes is not available.
Selecting the color temperature
You can change the tone of the picture by
selecting from three preset color temperatures:
Cool, Normal or Warm.
1
Press MENU, then press 1 or 2 to display
the PICTURE menu.
2
Press t or s to select Color Temperature
and press 1 or 2 to select mode you prefer.
PICTURE
Color Temperature
Cool
: Lends a blue hue to the picture.
Normal : Neutral
Warm
: Lends a red hue to the picture.
16
Using the TV's features
100
2
Pressing
lighter
higher
lighter
deeper
greenish
sharper
On
Cool
Adjusting the color management
You can adjust the picture color quality by
selecting from 6 base color adjustments: Red,
Green, Blue, Yellow, Magenta or Cyan.
1
Press MENU, then press 1 or 2 to display
the PICTURE menu.
2
Press t or s to select 3D Color
management, then press 1 or 2 to select
On.
PICTURE
3D Color management
3
Press OK, then press t or s to select Base
color adjustment.
4
Press OK, then press t or s to select an
item you want to adjust.
5
Press 2, then press 1 or 2 to select Hue,
Saturation or Brightness.
Base color adjustment
Hue
0
0
0
0
0
0
Reset
MENU
EXIT
Back
6
Press t or s to adjust the settings as
required.
Hue
0
MENU
Back
EXIT
Notes:
• If you select color management Off mode, this
mode is not available.
• In the PC input mode, this mode is not
available.
Resetting the base color adjustment
The Reset function adjusts the base color
adjustment to the factory settings.
1
From the Base color adjustment menu,
press t or s to select Reset.
2
Press OK
On
Saturation
Brightness
0
0
0
0
0
0
0
0
0
0
0
0
OK
Watch TV
Red
Saturation
Brightness
0
0
Watch TV