Toshiba ZH36 Series Manuel du propriétaire - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Toshiba ZH36 Series. Toshiba ZH36 Series 20 pages. Toshiba colour television zh36/37 owner's manual

Imprimer la page

Front connections and controls

A wide variety of external equipment can be connected via the sockets located behind the flap on the TV.

Press the centre of the flap to open it.

Whilst all the necessary adjustments and controls for the TV are made using the remote control, the buttons on

the TV may be used for some functions.

Switching on

If the power-on light is unlit press the POWER button on

the front of the TV to switch the set on, then press a

number button on the remote control to see the screen.

To put the set into Standby press

control. To view the TV press

number buttons. The picture may take a few seconds to

appear. Standby should only be used for short periods of

time.

To set up the TV you will now need to use the on-screen

menus. Press the MENU button on the remote control to

see the top menu bar.

This white menu bar will show five different topics shown

in symbols. As each symbol is selected by pressing the

S or R button on the remote control, its respective

options will appear below.

To use the options press the Q button on the remote

control to move down through them and S or R to select

the required choice. Follow the on screen instructions.

The functions of each menu are described in detail

throughout the manual.

on the remote

again or any of the

GREEN – On timer is set

RED – Power On

Power Button

Using the controls and connections

To alter the volume press —

To alter the programme position press

Press MENU and S , R , Q or P to control the sound

and picture options.

Press MENU to finish.

Before connecting any external equipment, turn off

all main power switches.

When connecting mono sound equipment to Input 3,

connect the audio output of the equipment to the

L/Mono socket on the TV.

To select the Inputs, press

EXT3 as described on page 16.

Please always refer to the owner's manual of the

equipment to be connected for full details.

Please note: Inserting the headphone jack will mute the

sound from all speakers.

e e

f f

until the display shows