MSI 612BF Manuel - Page 13

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} MSI 612BF. MSI 612BF 45 pages. 3d-agp vga / 3d-audio m/b for socket 370
Également pour MSI 612BF : Manuel de l'utilisateur (48 pages)

Imprimer la page

8. Primary IDE Connector (40-pin block): IDE1

This connector supports the provided IDE hard disk ribbon cable. After connecting the

single plug end to motherboard, connect the two plugs at other end to your hard disk(s). If

you install two hard disks, you must configure the second drive to Slave mode by setting its

jumpers accordingly. Please refer to the documentation of your hard disk for the jumper

settings.

Secondary IDE Connector (40-pin block): IDE2

This connector connects to the next set of Master and Slave hard disks. Follow the same

procedure described for the primary IDE connector. You may also configure two hard disks

to be both , Masters using one ribbon cable on the primary IDE connector and another

ribbon cable on the secondary IDE connector.

1. IDE activity LED: IDELED

This connector connects to the hard disk activity indicator light on the case.

11. Front Panel connector: This 16-pin connector to connect to case front panel switch.

A. Turbo LED switch: TBLED

The motherboard's turbo function is always on. The turbo LED will remain constantly lit

while the system power is on. You may also to connect the

system case to this lead. See the figure below.

B. Reset switch lead: RST

This 2-pin connector connects to the case-mounted reset switch for rebooting your

computer without having to turn off your power switch. This is a preferred method of

rebooting in order to prolong the life of the system's power supply. See the figure

below.

C. Keyboard lock switch lead & Power LED: KEYLOCK & PWLED

Power LED from the