Epson Stylus Pro 10600 - UltraChrome Ink - Stylus Pro 10600 Print Engine Manuel d'assemblage et de configuration - Page 7

Parcourez en ligne ou téléchargez le pdf Manuel d'assemblage et de configuration pour {nom_de_la_catégorie} Epson Stylus Pro 10600 - UltraChrome Ink - Stylus Pro 10600 Print Engine. Epson Stylus Pro 10600 - UltraChrome Ink - Stylus Pro 10600 Print Engine 14 pages. Product support bulletin
Également pour Epson Stylus Pro 10600 - UltraChrome Ink - Stylus Pro 10600 Print Engine : Brochure & Specs (8 pages), Fiche technique (8 pages), Manuel d'installation rapide (34 pages), Informations sur le produit (17 pages), Référence rapide (10 pages), Spécifications (4 pages), Bulletin d'information sur les produits (44 pages)

6. Hook the both ends of the center shafts on the

upper basket hooks.

7. Hold the front side shafts and turn it one

revolution as shown below.

8. Slide out the lower basket hooks to their full

length, then attach the L shape ends to the joint

sockets on the front side.

9. Hook the paper feed support film (G) on the

intermediate shaft of the paper basket, so that

it hangs along the inner surface of the basket.

10. Set 10 paper feed support films (G) at even

intervals of approximately 4 inches.

11. Slide the upper and lower basket hooks back.

12. Hook the basket rings in the directions shown

below to take up the slack.

Setting up Stylus Pro 10600

Connecting the power cord

1. Connect the power cord (R) to the AC inlet on

the back of the printer.