Epson Stylus Pro 4880 ColorBurst Edition - Stylus Pro 4880 ColorBurst Fiche technique - Page 3

Parcourez en ligne ou téléchargez le pdf Fiche technique pour {nom_de_la_catégorie} Epson Stylus Pro 4880 ColorBurst Edition - Stylus Pro 4880 ColorBurst. Epson Stylus Pro 4880 ColorBurst Edition - Stylus Pro 4880 ColorBurst 6 pages. Warranty statement
Également pour Epson Stylus Pro 4880 ColorBurst Edition - Stylus Pro 4880 ColorBurst : Pour commencer (13 pages), Brochure & Specs (6 pages), Manuel de configuration (16 pages), Manuel de référence rapide (12 pages), Manuel du réseau (46 pages), Manuel d'installation (4 pages), Manuel d'information sur les produits (16 pages), Garantie limitée (12 pages)

Imprimer la page
Epson Stylus Pro 4880 ColorBurst Edition - Stylus Pro 4880 ColorBurst Fiche technique
6
After installing all 8 cartridges, lower the ink levers.
The printer begins charging the ink delivery system
and the
pause light flashes.
7
After approximately 2 minutes, ink lever messages
appear on the LCD. Follow the instruction to raise
or lower the ink levers.
Charging takes about 8 minutes. Never turn
Caution:
off the printer, open the cover, remove the rear cover,
release the paper lever, or remove the ink cartridges or
maintenance tank while the
you may damage the printer.
8
When READY appears on the LCD display, charging is complete. Close the ink
compartment covers.
Always turn off the printer using the
Caution:
turns off. This ensures that the print head is safely capped.
Install Software for a USB Connection
Your printer software works with Windows Vista,
Edition, and Macintosh
follow the steps below to install the printer software. If you are using the Ethernet interface, follow the
steps in Chapter 1 of the Printer Guide to configure the printer and install the software.
When you're finished installing software, update the printer firmware if necessary. See chapter 1 of the
Printer Guide for instructions.
Macintosh
1
Make sure your Macintosh and printer are turned on.
2
Connect the USB cable.
3
Insert the Epson Stylus
Pro 4880 printer CD.
If necessary, double-click
the Epson CD-ROM
desktop icon.
4
Double-click the
5
Click Install.
If you see a message that the installer has
Note:
detected an older version of EpsonNet Config on
your system, you must uninstall the older version
before you can install the new one. To uninstall,
drag the EpsonNet folder to the trash. Then
reinstall your printer software.
6
Follow the on-screen instructions to install all
the necessary software and manuals, and place a
link to the Epson Professional Imaging Website
on your desktop.
7
Open the Applications folder, then open the Utilities folder. Open the Printer Setup
Utility and click the Add icon at the top of the printer list window. (If you see a message that
you have no printers available, click Cancel.)
8
Select the Stylus Pro 4880 and click Add.
9
Close the printer list and any open windows, then eject the CD.
pause light is flashing, or
OS X 10.4.9 or higher, or 10.5 or higher. If you are using the USB interface,
®
Epson icon.
power button. Then wait until the LCD display
Vista x64, Windows
®
®
XP, XP Professional x64