Epson Stylus Pro 7600 Photographic Dye Ink Manuel de déballage et d'installation - Page 10

Parcourez en ligne ou téléchargez le pdf Manuel de déballage et d'installation pour {nom_de_la_catégorie} Epson Stylus Pro 7600 Photographic Dye Ink. Epson Stylus Pro 7600 Photographic Dye Ink 24 pages. Epson stylus pro 7600: brochure
Également pour Epson Stylus Pro 7600 Photographic Dye Ink : Brochure & Specs (24 pages), Manuel d'information (16 pages), Spécifications (4 pages), Manuel d'installation rapide (34 pages), Informations sur le produit (15 pages), Manuel de référence rapide (11 pages), Garantie (8 pages), Brochure & Specs (8 pages), Brochure & Specs (16 pages), Manuel de référence du produit (28 pages), Mise à jour du manuel (4 pages)

6. Hook the both ends of the center shafts (U) on

the upper basket hooks.

7. Hold the front side shafts (V) and turn it one

revolution as shown below.

8. Slide out the lower basket hooks to their full

length, then attach the L shape ends to the joint

sockets (W) on the front side.

9. Slide the upper and lower basket hooks back.

10. Hook the basket rings in the direction shown

below to take up the slack.

11. As shown in the figure, hook the paper feed

support film on the intermediate shaft of the

paper basket, so that it hangs along the inner

surface of the basket.

Note:

Set five paper feed support films at even intervals

in the order shown in the figure.

Unpacking and Assembling

Stylus Pro 7600

Choosing a Place for the Printer

Leave adequate room for easy operation,

maintenance, and ventilation.

Leave at least 15 cm between the back of the

printer and the wall.

Place the printer on a desk. If you can not place

the printer on a desk, you will need the

optional Stand. If you place your printer on a

desk, follow the guidelines listed below.

Choose a desk that can hold the printer

weight (about 43.5 kg) and has a height of

600-800 mm from the floor.

Make sure the surface is flat and stable.