Philips Signage Solutions BDL4252EL Manuel de l'utilisateur - Page 13

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Philips Signage Solutions BDL4252EL. Philips Signage Solutions BDL4252EL 43 pages. 42" edge led backlight full hd ops slot e-line display
Également pour Philips Signage Solutions BDL4252EL : Manuel rapide (3 pages), Spécifications (3 pages)

Imprimer la page

BDL4252EL

1.6.

Mounting in Portrait Position

This display can be installed in portrait position.

1. Remove the table stand, if attached.

2. Rotate 90 degrees clockwise. The "

1.6.1. How to use the logo guider for portrait position

1. Put the guider on the lower-left corner of the front bezel of the display.

Fold down both of its edges.

2. Peel off the protective film at the back of the "

Hold and press the guider with your left hand. Put the "

sticker with its adhesive side down into the logo hole with your right

hand, and press to make it stick tightly onto the front bezel.

3. Remove the guider.

1.6.2. How to remove the logo

1. Prepare a piece of paper with a cutting area of logo as a protector to

prevent the front bezel from scratching.

2. Using a knife, carefully remove the logo sticker with the paper placing

beneath.

3. Tear off the logo sticker.

NOTE: W hen installing the display on a wall, please consult a professional technician for proper installation. We accept no liability for installations not

performed by a professional technician.

" logo should be on the LEFT side when facing the display.

" logo sticker.

" logo