Philips 3 CD CHANGER WITH DOLBY PRO LOGIC PROCESSOR FWP88C Manuel de l'utilisateur - Page 12

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Philips 3 CD CHANGER WITH DOLBY PRO LOGIC PROCESSOR FWP88C. Philips 3 CD CHANGER WITH DOLBY PRO LOGIC PROCESSOR FWP88C 31 pages. 3 cd changer with dolby® pro logic processor, five loudspeakers, 320 watts total power
Également pour Philips 3 CD CHANGER WITH DOLBY PRO LOGIC PROCESSOR FWP88C : Spécifications (2 pages), Manuel (31 pages)

Philips 3 CD CHANGER WITH DOLBY PRO LOGIC PROCESSOR FWP88C Manuel de l'utilisateur
CONTROLS
í PREV / SIDE / NEXT ë
(PRESET 4 3 )
for CD ............ to skip to the beginning
of the current, previous,
or next track.
for TUNER ..... to select a preset radio
station in memory.
for TAPE ........ to select tape side
(back or front) in tape
deck 2 only.
for CLOCK ..... to set the minute (on
the system only) .
™ RECORD
to start recording on tape deck 2.
£ VOLUME
to increase or decrease the volume.
≤ DUB (HSD) (HIGH SPEED
DUBBING)
to dub a tape in normal or fast speed.
∞ BASS/TREBLE CONTROL – to
adjust BASS/TREBLE level :
BASS 3 4
to increase or decrease the low tone.
TREBLE 3 4
to increase or decrease the high tone.
§ A. REV (AUTO REVERSE)
available in tape deck 2 only.
to select the desired play modes
( å / ∂ / ∫ ).
12
pg 01-31/P88/22-Eng
12
≥ wOOx PLUS
to select between normal or enhanced
wOOx sound effect.
wOOx LEVEL
to select desired wOOx level :
WOOX 1, WOOX 2 or WOOX 3.
• TAPE DECK 2
ª TAPE DECK 1
º CLOCK
to view clock display.
⁄ REPEAT
to repeat a CD track, a disc, or all
available discs.
¤ TEST TONE
to check the sound level of the Front
Left, Front Right, Center and Surround
speakers.
‹ CENTER +/-
to adjust the sound level of the center
speaker.
› TIMER ON/OFF
to switch on or off timer.
fi SLEEP
to switch the system to standby mode
at a selected time.
fl REAR +/-
to adjust the sound level of the
surround speakers.
‡ BALANCE L/R
to balance the sound level of the Front
Left and Right speakers.
° SHUFFLE
to play all the available discs and their
tracks in random order.
· DIGIT 0 – 9
(numbers consisting of two figures
must be keyed in within 2 seconds)
for CD ............ to key in a CD track for
playback or
programming.
for TUNER ..... to key in a preset radio
station.
‚ B
to switch the system to standby mode.
Notes for remote control:
– First select the source you wish to
control by pressing one of the
source select keys on the remote
control (e.g. CD, TUNER, etc.).
– Then select the desired function
( É , í , ë , etc.).
3/6/00, 1:26 PM
3139 116 19721