Philips 3 DISC SHELF STSYEM W60 FWC3C37 Manuel de l'utilisateur - Page 9

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Philips 3 DISC SHELF STSYEM W60 FWC3C37. Philips 3 DISC SHELF STSYEM W60 FWC3C37 28 pages. Philips mini hi-fi systems brochure

Imprimer la page

A AM Loop Antenna

Connection

Connect the supplied loop antenna to

the AM ANTENNA terminal. Place the

AM loop antenna far away from the

system and adjust its position for the

best reception.

B FM Wire Antenna

Connection

Connect the supplied FM wire antenna

to the FM AERIAL (FM ANTENNA)

300

terminal. Adjust the position of

the FM antenna for the best reception.

Outdoor Antenna

For better FM stereo reception,

connect an outdoor FM antenna to the

FM AERIAL (FM ANTENNA) 300

terminal using a 300

dipole wire.

FM AERIAL 300

FM ANTENNA 300

C Speakers Connection

• Connect the right speaker to Front

terminal R, with the colored wire to

+ and the black wire to -.

• Connect the left speaker to Front

terminal L, with the colored wire to

+ and the black wire to -.

• Clip the stripped portion of the

speaker wire as shown.

pg 01-28/C3-35-30/37-Eng 1

PREPARATION

12 mm

unlock

lock

D Rear Surround

Speakers' Connection

(for models FWC3 & FWC35

only)

Connect the black (non-marked) wires

to the black REAR SURROUND

terminals and the colored (marked)

wires to the grey REAR SURROUND

terminals.

E Subwoofer Out

Connection

Connect the optional active subwoofer

to the SUBWOOFER OUT terminal.

The subwoofer reproduces just the low

bass sound effect (e.g. explosions, the

rumble of spaceships, etc.). Be sure to

follow the instructions supplied with the

subwoofer.

F Connecting other

equipment to your

system

You can connect the audio left and right

OUT terminals of a TV, VCR, Laser Disc

player, DVD player or CD Recorder to

the AUX IN terminals at the rear of the

system.

G AC Power Supply

After all other connections have been

made, connect the AC power cord to

the system and to the wall outlet.

12/14/99, 9:48 AM

Inserting batteries into the

Remote Control

• Insert the batteries (Type R06 or

AA) into the remote control as

shown in the battery compartment.

• To avoid damage from possible

battery leakage, remove dead

batteries or batteries that will not be

used for a long time. For

replacement, use type R06 or AA

batteries.

3139 116 19372 (ENG)