Philips 7000 series Manuel de l'utilisateur - Page 10

Imprimer la page

Philips 7000 series Manuel de l'utilisateur

Wall mount

Note

•

Improper wall mounting may result in accident,

injury or damage. If you have any query, contact

Consumer Care in your country.

•

Before wall mounting, make sure the wall can

support the weight of your soundbar.

•

Before wall mounting, you need not remove the

rubber feet at the bottom of the soundbar,

otherwise the rubber feet cannot be �xed back.

•

Depending on the type of wall mounting, make

sure that you use screws of a suitable length and

diameter.

•

Please check whether the USB port on the back of

the soundbar is connected to a USB device. If it is

found that the connected USB device aﬀects the

wall-mount, you need to use another USB device

of the appropriate size.

Screw length/diameter

1.8-2.3mm/0.07-0.09"

>33mm/1.3"

Suggested wall mounting height

You are recommended to install the TV

�rst before wall mounting the soundbar.

With a TV preinstalled, wall mount the

soundbar 50mm/2.0'' in distance from

the bottom of the TV.

WARNING !

•

To prevent injury, this apparatus must be securely

attached to the �oor/wall in accordance with the

installation instructions.

•

Suggested wall mounting height:≤ 1.5 meters.

4mm/

0.16"

~50mm/2.0"

731mm / 28.78"

Drill 2 parallel holes (diameter 3-8mm

each according to wall type) on the

wall.

The distance between the holes

are: 731mm / 28.78"

You can use the wall mount

template provided for helping the

drilling holes position on the wall.

Secure the dowels and screws in the

holes.

Be sure to leave a 1.8-2.3mm gap

between the wall and the screw's

head.

Attach the wall brackets (x2) into the

back of the unit.

Hang the soundbar on the fastening

screws.

1.8-2.3mm/0.07-0.09"

4mm/

0.16"

>33mm/1.3"