Philips 7000 series Manuel de l'utilisateur - Page 16

Imprimer la page

Philips 7000 series Manuel de l'utilisateur

Problem

The appliance produces a

pumping sound/the handle

vibrates.

Steam and water leak around

steam trigger and/or handle

area.

Steam gets weaker over time.

Steams leave stains on the

garment or impurities come out

of the steamer head.

Noise is heard coming from

steamer head along with trickle

of steam when product is left

aside or rested to cool down.

www.philips.com/welcome

Possible cause

The condensed water from previous

session remains within the steam

flow path.

Water is pumped to the steamer

head to be converted into steam.

The water level in the water tank is

too low or it has been fully used up.

Water tank filling door is not closed

properly.

Scales/calc are formed inside the

appliance.

Scales/calc are formed inside the

appliance.

Apart from tap water, you have filled

other liquids/additives or descaling

agents into the water tank.

The appliance has not been fully

cooled down.

Steam engine is still hot with residual

water left in the steam path.

Solution

Press and hold steam trigger for at least 3 seconds to release

any water droplet residues at the beginning of steaming

session before steaming directly on a garment.

This is normal.

Unplug the appliance and refill the water tank.

Press down the filling door.

Perform rinsing function (refer to

Appliance is designed to be used with tap water. In area

with hard water, it is recommended to use distilled or

demineralization water (50% demineralization/distilled water

mixed with water could be used as well).

Allow the appliance to fully cooled down (~60 minutes).

section).