Philips AX2300 Manuel d'entretien - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel d'entretien pour {nom_de_la_catégorie} Philips AX2300. Philips AX2300 22 pages. Mini syst.
Également pour Philips AX2300 : Démarrage rapide (4 pages), Manuel d'utilisation (14 pages), Spécifications techniques (2 pages), Spécifications (2 pages)

Imprimer la page

1. Technical Specification

INSTRUCTION FOR USE

POWER SUPPLY / GENERAL INFORMATION

Use only the AY 3170 adapter (4.5 V / 300 mA direct current, positive pole to the

center pin). Any other product may damage the player.

1 Make sure the local voltage corresponds to the power adapter's voltage.

2 Connect the power adapter to the 4.5V DC socket of

the player and to the wall socket.

Note: Always disconnect the adapter when you are not

using it.

Environmental information

• All redundant packing material has been omitted. We have done our utmost to

make the packaging easily separable into two materials: cardboard (box) and

polyethylene (bags, protective foam sheet).

• Your set consists of materials which can be recycled if disassembled by a

specialized company. Please observe the local regulations regarding the

disposal of packing materials, exhausted batteries and old equipment.

This product complies with the radio interference requirements of the

European Union.

• Do not touch the lens A of the CD player.

• Do not expose the unit, batteries or CDs to humidity, rain, sand or excessive

heat (caused by heating equipment or direct sunlight).

• You can clean the CD player with a soft, slightly

dampened, lint-free cloth. Do not use any cleaning

agents as they may have a corrosive effect.

• To clean the CD, wipe it in a straight line from the

center toward the edge using a soft, lint-free cloth. A

cleaning agent may damage the disc! Never write on

a CD or attach a sticker to it.

• The lens may cloud over when the unit is moved sud-

denly from cold to warm surroundings. Playing a CD is

not possible then. Leave the CD player in a warm environment until the mois-

ture has evaporated.

• Active mobile phones in the vicinity of the CD player may cause malfunctions.

• Avoid dropping the unit as this may cause damage.

Headphones HE 035

• Connect the supplied headphones to the LINE OUT/p

jack of the player.

Note: LINE OUT / p can also be used for

connecting this set to your HiFi system.To adjust

the sound and volume, use the controls on the

connected audio equipment and on the CD player.

IMPORTANT!

Hearing safety: Do not play your headphones at a high vol-

ume. Hearing experts advise that continuous use at high volume can permanently dam-

age your hearing.

Traffic safety: Do not use headphones while driving a vehicle. It may create a hazard

and it is illegal in many countries. Even if your headphones are an open-air type

designed to let you hear outside sounds, do not turn up the volume so high that you

cannot hear what is going on around you.

2-2

GENERAL INFORMATION / CD PLAY

Only use the AY 3545 (4822 219 10033) or AY 3548 (3140 118 71890) car voltage

converter (4.5 V DC, positive pole to the centre pin) and the AY 3501 car adapter

cassette. Any other product may damage the set.

Put the set on a horizontal, vibration-free and stable surface. Make sure it is

in a safe place, where the set is neither a danger nor an

obstacle to the driver and the passengers.

Plug the voltage converter into the

cigarette lighter socket (only for 12 V car

battery, negative grounding), then connect

the wired end with 4.5V DC input socket on the

set.

If necessary, clean the cigarette lighter socket

to obtain a good electrical contact.

Turn down the volume and connect the cassette

adapter plug to LINE OUT/p on the set.

Carefully insert the cassette adapter into the car radio's cassette compartment.

Make sure the cord does not hinder your driving.

Decease the volume on the set, if necessary. Start playback on the set and

adjust the sound with the car radio controls.

• Always remove the voltage converter from the cigarette lighter socket

when the set is not in use.

Note: If your car radio has a LINE IN socket , it is better to use it for the

car radio connection instead of the cassette adapter. Connect the signal

lead to this LINE IN socket and to LINE OUT/p on the set.

This CD-player can play all kinds of Audio Discs such

as CD-Recordables and CD-Rewritables. Do not try to play a CD-ROM, CDi, VCD,

DVD or computer CD.

1 Push the OPEN 2 slider to open the player.

2 Insert an audio CD, printed side up, by pressing the

CD onto the hub.

3 Close the player by pressing the lid down.

4 Press 2; to switch the player on and start playback.

yThe current track number and elapsed playing

time are displayed.

• You can pause playback by pressing 2;.

yThe time at which playback was paused starts

flashing.

• You can continue playback by pressing 2; again.

5 Press 9 to stop playback.

yThe total number of tracks and the total playing

time of the CD are displayed.

6 Press 9 again to switch the player off.

• To remove the CD, hold it by its edge and press the

hub gently while lifting the CD.

Note: If there is no activity, the set will automatically

switch off after a while to save ener

12 V DC

4,5 V DC

E S P