Philips AZ5738 Manuel de l'utilisateur - Page 19

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Philips AZ5738. Philips AZ5738 27 pages. Cd soundmachine
Également pour Philips AZ5738 : Spécifications (2 pages), Manuel de démarrage rapide (1 pages), Manuel de l'utilisateur (28 pages), Manuel de démarrage rapide (1 pages), Manuel de l'utilisateur (27 pages), Spécifications (2 pages), Manuel d'entretien (20 pages)

Imprimer la page

Setting the screen saver

If set to ON, the screen saver will be activated

when you leave the system in stop or pause

mode for 5 minutes. The default setting is ON.

OFF

If screen saver set to off, in any status, the screen

saver will not activate.

Setting the TV Tape

Make sure the format you need is available on

the disc. If not, your setting will be invalid.

4:3PS (Pan and Scan mode)

Select this if you have a conventional TV set and

your DVD is not formatted for wide screen

viewing. A wide picture will display on the whole

TV screen with a portion automatically cut off.

4:3LB (Letterbox mode)

Select this if you have a conventional TV set and

your DVD is formatted for wide screen viewing.

Black bars appear on the upper and lower

portions of the TV screen.

16:9 (Wide-screen TV)

Select this if you have a wide-screen TV set (you

must also set your wide screen TV to "full size").

DVD Menu Operations

4:3 PS

(Pan Scan)

4:3 LB

(Letter Box)

416:9

(Wide screen)

Changing the password

You can change the four-digit code used as

Password.

In disc mode, press SYSTEM MENU.

Select

icon and press 4.

Press 5 / 4 on the remote control to navigate

in the menu.

➜ Move to "PASSWORD" and press

Use the numeric keys (0-9) to enter your

four-digit code.

➜ The password supplied by default is 0000.

➜ If you forget the four-digit code, press 9 four

times, the system will change back to the default

password.

Enter your new code. Then press OK to

confirm.

Press SYSTEM MENU again to remove the

menu.