MSI MSI-8000HD Manuel de l'opérateur - Page 28
Parcourez en ligne ou téléchargez le pdf Manuel de l'opérateur pour {nom_de_la_catégorie} MSI MSI-8000HD. MSI MSI-8000HD 48 pages. Rf remote display
Imprimer la page
Scan Weight Inputs
1) Program a function key to Scan.
In this example we'll use
2) The current channel is displayed.
Press
F1 Scan
display to the next channel.
3) The display briefly displays the
scan channel number. Then the
scan channel weight is
displayed.
4) Press
F1
Scan. In a two sensor
system the scan returns to the
first channel, 0.
5.4 Summing Modes
The summing modes are straight forward and useful for many overhead lifting
applications.
5.4.1 Modes
ALL
All channels are added together. Using the
connected sensors are displayed. Pressing the
observing the summed channels by briefly displaying "ttl.rd" (total remote sensor
devices).
If the sum is the only thing the user wants to observe, disable the Scan
Note
function key using the function key setup menu.
PAIRS
Primarily intended for 4 sensor systems. When scrolling through the channels with an
Fx ttl.rd
, the channels will be presented as separate weights first and then as pairs.
This display is proceeded by the LCD message "Pair1" and "Pair2."
BOTH
This mode shows both the pair totals and the overall total. Each press of the
key will scroll through the summed combinations. First "Pair1," next "Pair2," then
the sum of all connected sensors is displayed.
OFF
Sensor summing disabled. Even if a function key is set to "ttl.rd" nothing will happen.
24
MSI-8000HD Operator's Manual
F1
for Scan.
to change the
Figure 5-4. Scan Weight Inputs
See Function Key setup
on page 15.
F1
SCAN
MOMENTARY
F1
SCAN
MOMENTARY
Fx ttl.rd
again will confirm that you are
Fx ttl.rd
M
M
MTon
function key, the sum of all
Ton
Ton
kg
kN
lb
kN
lb
kg
kN
lb
Fx ttl.rd