MSI MSI-8000HD Manuel de l'opérateur - Page 8

Parcourez en ligne ou téléchargez le pdf Manuel de l'opérateur pour {nom_de_la_catégorie} MSI MSI-8000HD. MSI MSI-8000HD 48 pages. Rf remote display

Item No

7 (cont)

KILONEWTONS (kN) Annunciator – Indicates load display is in

kiloNewtons.

KILOGRAMS (kg) Annunciator – Indicates load display is in kilograms.

POUND (lb) Annunciator – Indicates load display is in pounds.

SETPOINTS – User programmable set points for overload warnings. Set

Points 1 and 2 are high brightness red LEDs

1234 – if the 8000HD has multiple sensors, the number indicates the sensor

being displayed. If more than one number is lit, then the sensors are being

summed.

Example – if both 1 and 2 are lit, then the weight displayed equals the sum

of sensor 1 and sensor 2.

DIGITS – Six 1.22 inch (31 mm) sunlight visible LCD load display.

POWER Key – Turns the

When in setup mode, returns to the normal weight/load display without

storing the changes.

ZERO Key – Used to zero out residual load on the scale/Dynalink.

When in the setup mode, drops back one menu level.

At the root menu level, stores the changes and returns to load mode.

Tare Key – Removes the current load value and puts the system in to the

NET weight mode.

LOW BATT Annunciator – Indicators battery power is low.

The function keys (F1 znd F2) will be displayed as Fx-YYYY, when used to

Note

describe it's use.

x = function key number, 1 or 2..

YYYY = currently programed function for that key.

F1 and F2 can both be programmed to all available user functions.

If a function key does not work, it is probably because the connected Scale/Dyna-Link

is not setup to support the key.

Example:

If the Function key is set for TOTAL, you must also setup the TOTAL mode in the Setup

Menu of the target scale.

MSI-8000HD Operator's Manual

Description

unit

ON and OFF.