Philips BTM2060W Manuel de l'utilisateur - Page 13
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Philips BTM2060W. Philips BTM2060W 21 pages.
Également pour Philips BTM2060W : Manuel de l'utilisateur abrégé (2 pages)
Imprimer la page
5 Listen to FM
radio
Tune to FM radio stations
Note
•
Position the antenna as far as possible from TV, VCR, or
other radiation source.
•
Make sure that you have connected and fully extended
the supplied FM antenna.
1
Press FM to select FM tuner mode.
2
Press and hold
» [SEARCH] (search) is displayed.
» The system tunes to an FM station
with strong reception automatically.
3
Repeat step 2 to tune to more stations.
To tune to a station with weak signal:
Press
/
repeatedly until you find good
reception.
Program FM radio stations
automatically
Note
•
You can program a maximum of 20 preset FM radio
stations.
In FM tuner mode, press and hold PROG for 3
seconds.
» [AUTO] (auto) is displayed.
» The system stores all the FM radio stations
automatically, and then broadcasts the first
preset radio station.
13
EN
/
for 3 seconds.
Program FM radio stations
manually
1
In tuner mode, tune to an FM radio station.
2
Press PROG to activate programming
mode.
» [PROG] (program) blinks.
3
Press
or
repeatedly to select a
channel number.
4
Press PROG again to confirm.
5
Repeat steps 1-4 to store other FM
stations.
Note
•
To remove a pre-stored station, store another station
in its place.
Select a preset radio station
In tuner mode, press
buttons to select a preset number.
Show RDS information
RDS (Radio Data System) is a service
that allows FM stations to show additional
information. If you tune to an RDS station, an
RDS icon is displayed.
1
Tune to an RDS station.
2
Press RDS repeatedly to scroll through the
following information (if available):
» Program service
» Program type such as [NEWS] (news),
[SPORT] (sport), [POP M] (pop
music)...
» Radio text message
» Time
/
or the numeric