MSI Optix Series Manuel - Page 26

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} MSI Optix Series. MSI Optix Series 30 pages.
Également pour MSI Optix Series : Manuel (34 pages), Manuel (31 pages), Manuel de l'utilisateur (46 pages), Manuel (28 pages), Manuel (32 pages), Manuel (38 pages), Manuel de l'utilisateur (30 pages), Manuel de démarrage rapide (24 pages), Manuel (31 pages), Manuel (31 pages), Manuel de l'utilisateur (33 pages), Manuel (31 pages), Manuel de l'utilisateur (26 pages), Manuel (26 pages), Manuel (32 pages), Manuel (32 pages), Manuel (32 pages), Manuel (28 pages), Manuel de l'utilisateur (29 pages), Manuel de l'utilisateur (31 pages), Manuel de l'utilisateur (27 pages), Manuel de l'utilisateur (28 pages), Manuel de l'utilisateur (25 pages), Manuel de l'utilisateur (33 pages), Manuel de l'utilisateur (31 pages), Manuel (30 pages), Manuel de l'utilisateur (31 pages), Manuel de l'utilisateur (29 pages), Manuel (32 pages), Manuel (33 pages), Manuel (33 pages), Manuel (33 pages), Manuel de l'utilisateur (26 pages), Manuel (27 pages), Manuel (31 pages), Manuel (28 pages), Manuel de l'utilisateur (25 pages), Manuel de l'utilisateur (32 pages), Manuel de l'utilisateur (32 pages), Manuel (30 pages), Manuel d'instructions (33 pages), Manuel (28 pages), Manuel (31 pages), Manuel (27 pages), Manuel (30 pages), Manuel de l'utilisateur (26 pages), Manuel (25 pages), Manuel (25 pages), Manuel (32 pages), Manuel (31 pages), Manuel (44 pages), Manuel (27 pages), Manuel de l'utilisateur (26 pages), Manuel de l'utilisateur (26 pages), Manuel (28 pages), Manuel (31 pages), Manuel (38 pages)

Imprimer la page

Safety Instructions

∙ Read the safety instructions carefully and thoroughly.

∙ All cautions and warnings on the device or user's manual should be noted.

∙ Refer servicing to qualified personnel only.

∙ Keep the User's Guide that comes with the package for future reference.

∙ To prevent fire or shock hazard, keep this device away from humidity and high

temperature.

∙ Lay this device on a reliable flat surface before setting it up.

∙ Make sure that the power voltage is within its safety range and has been adjusted

properly to the value of 100~240V before connecting the device to the power outlet.

Do not disable the protective earth pin from the plug. The device must be connected

to an earthed mains socket-outlet.

∙ Always disconnect the power cord or switch the wall socket off if the device would

be left unused for a certain time to achieve zero energy consumption.

∙ The ventilator on the device is used for air convection and to prevent the device from

overheating. Do not cover the ventilator.

∙ Do not leave the device in an unconditioned environment with a storage temperature

above 60℃ or below -20℃, which may damage the device.

∙ NOTE: The maximum operating temperature is around 40℃.

∙ When cleaning the device, be sure to remove the power plug. Use a piece of soft

cloth rather than industrial chemical to clean the device. Never pour any liquid into

the opening; that could damage the device or cause electric shock.

∙ Place the power cord in a way that people are unlikely to step on it. Do not place

anything on the power cord.

∙ Always keep strong magnetic or electrical objects away from the device.

∙ If any of the following situations arises, get the device checked by service personnel:

• The power cord or plug is damaged.

• Liquid has penetrated into the device.

• The device has been exposed to moisture.

• The device does not work well or you can not get it work according to user's

manual.

• The device has dropped and damaged.

• The device has obvious sign of breakage.

∙ To prevent the monitor from tipping over, secure the monitor to a desk, wall or fixed

object with a anti-tip fastener that helps to properly support the monitor and keep it

safe in place.

⚠

Important

Please confirm the power distribution system in the installation site shall provide the

circuit breaker rated 120/240V, 20A (maximum).

Safety Instructions