Philips DCM278/79 Manuel de l'utilisateur - Page 14
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Philips DCM278/79. Philips DCM278/79 22 pages. Philips micro hi-fi system dcm278
Également pour Philips DCM278/79 : Manuel de démarrage rapide (3 pages), Spécifications (3 pages)
![Philips DCM278/79 Manuel de l'utilisateur](/uploads/products/server2/6306553/6306553.png)
6 Listen to radio
Tune to a radio station
1
Press TUNER to select FM.
2
Press and hold
seconds.
» SEARCH] (search) is displayed.
[
»
The radio tunes to a station with
strong reception automatically.
3
Repeat step 2 to tune to more stations.
•
To tune to a weak station, press
/
repeatedly until you find optimal
reception.
Program radio stations
automatically
You can program a maximum of 20 preset
radio stations (FM).
1
In the tuner mode, press and hold
PROG/CLOCK SET for more than 2
seconds to activate automatic program
mode.
» AUTO] (auto) is displayed.
[
»
All available stations are programmed
in the order of waveband reception
strength.
»
The first programmed radio station is
broadcast automatically.
Program radio stations
manually
You can program a maximum of 20 preset
radio stations (FM).
1
Tune to a radio station.
2
Press PROG/CLOCK SET to activate
program mode.
/
for more than 2
» PROG] (program) is displayed.
[
3
Press / to allocate a number to this
radio station, then press PROG/CLOCK
SET to confirm.
4
Repeat the above steps to program other
stations.
Tip
•
To overwrite a programmed station, store
another station in its place.
Select a preset radio station
1
In tuner mode, press / to select a
preset number.
Tip
•
Position the antenna as far as possible from
TV, VCR or other radiation source.
•
For optimal reception, fully extend and adjust
the position of the antenna.
FM stations with RDS
Radio Data System (RDS) is a service that
sends additional broadcast information along
with FM stations.
If you listen to a FM station with RDS signal,
"RDS" is displayed.
Display RDS information
1
For an FM station with RDS, press
RDS/DISPLAY repeatedly to display
various broadcast information.
EN
15