Toshiba XD-E500 Manuel du propriétaire - Page 16

Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Toshiba XD-E500. Toshiba XD-E500 46 pages. Upconverting 1080p extended detail dvd player
Également pour Toshiba XD-E500 : Spécifications (2 pages)

Imprimer la page

rying a Disc

This section shows you the basics on how to playa disc.

CAUTION

Keep your fingers well clear of the disc tray as it is closing.

Neglecting to do so may cause serious personal injury.

•• Basic playback

Preparations

• When you want to view a disc, turn on the TV and select the

video input connected to the DVD player.

• When you want to enjoy the sound of discs from the audio

system, turn on the audio system and select the input

connected to the DVD player.

Press the ON/STANDBY button.

1/6

ON/STANDBY

The DVD player turns on.

• To obtain a higher quality picture

Occasionally, some picture noise not usually visible during

a normal broadcast may appear on the TV screen while

playing a DVD because the high resolution pictures on these

discs include a lot of information. While the amount of noise

depends on the TV you use with this DVD player, you should

generally reduce the sharpness adjustment on your TV when

viewing DVDs.

• To start playback in the stop mode

Press PLAY.

PLAY

Press OPEN/CLOSE.

OPEN/CLOSE

The disc tray opens.

• To pause playback (still mode)

Press PAUSE/STEP during playback.

Place the disc on the disc tray.

Press OPEN/CLOSE to close the disc tray.

• There are two different disc sizes. Place the disc in

the correct guide on the disc tray. If the disc is out of

the guide, it may damage the disc and cause the DVD

player to malfunction.

• Do not place a disc which is unplayable in this DVD

player.

To resume normal playback, press the

PLAY button .

• The sound is muted during still mode.

Remove the disc after the disc tray

opens completely.

Be sure to press the OPEN/CLOSE

button to close the disc tray after you

remove the disc.

PAUSE/STEP

OPEN/CLOSE

• To stop playback

Press STOP.

STOP

• To remove the disc

Press OPEN/CLOSE.

With the playback side

down

Playback starts.

OPEN/CLOSE

If you insert a DVD that contains a top menu, a

menu may appear. Use

.AI , I .... 1

to select the

title you want to view, then press ENTER to start

playback.

• You may need to press the TOP MENU or MENU

button to display disc menu (depending on the actual

DVD.)

Notes

• If the disc tray is holding a disc you have already played,

playback will begin from the location where you last stopped.

For resuming playback, see

• Some video CD are recorded with PBC (Playback Control), a menu

with recorded contents may appear on the TV if you have turned

the PBC on. You can make your selection according to its PBC

menu. Press the PBC button on the remote control to turn PBC on

or off anytime during Video CD playback. When switching from

PBC off to PBC on mode, playback will start from the beginning of

the disc. To turn on the menu display again, press the RETURN

button.

• To turn the power off

Press ON/STANDBY to turn the unit off.

• Automatic Power Off function

If the DVD player is stopped, or the screen saver is

engaged for approximately 20 minutes, the DVD player

will automatically turn itself off.

Notes

• Do not move the DVD player during playback. Doing so may

damage the disc.

• Use the OPEN/CLOSE button to open and close the disc tray. Do

not push the disc tray while it is moving. Doing so may cause the

DVD player to malfunction.

• Do not push up on the disc tray or put any objects other than discs

on the disc tray. Doing so may cause the DVD player to malfunction.

• In many instances, a menu screen will appear after playback of a

movie is completed. Prolonged display of an on-screen menu

may damage your television set, permanently etching that image

onto its screen. To avoid this, be sure to press the STOP button on

your remote control once the movie is completed.