Philips Expanium AZ 1538 Manuel - Page 8
Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Philips Expanium AZ 1538. Philips Expanium AZ 1538 13 pages. Cd sound system
Également pour Philips Expanium AZ 1538 : Manuel de l'utilisateur (2 pages), Spécifications (2 pages), Manuel d'entretien (31 pages)
Imprimer la page
MP3-CD PLAYER
3. To select normal playback, press CD MODE/BAND
repeatedly until the various modes are no longer
displayed.
– You can also press the 9 button to cancel your
play mode.
Programming track numbers
In the stop position, select and store your CD tracks in
the desired sequence. Up to 20 tracks can be stored in
the memory.
1. Press SEARCH ∞ or § on the set to select your
desired track number.
MP3-CD mode only:
First press ALBUM, PRESET + or - once or more to
find your album.
2. Press PROG.
™ Display:
PROGRAM
™ If you attempt to program without first
selecting a track number, nOSEL is shown.
3. Repeat steps 1-2 to select and store all desired
tracks.
™ Display: FuLL if you try to program more
than 20 tracks.
Reviewing the program
In the stop position, press and hold PROG until the
display shows all your stored track numbers in
sequence.
Erasing a program
You can erase the program by:
• pressing 9 twice
™ CLr is displayed briefly and PROG
disappears.
• You select TUNER /POWER
Environmental information
We have done our best to reduce the packaging and make it easy to separate into 3 materials:
cardboard, expandable polystyrene, polyethylene.
Your set consists of materials which can be recycled if disassembled by a specialized company.
Please observe the local regulations regarding the disposal of packaging, exhausted
batteries and old equipment.
and Prog.(See 6 )
.
OFF
SAFETY AND MAINTENANCE
SAFETY & MAINTENANCE INFORMATION
(See 8 )
• Don't expose the set, batteries or CDs to humidity,
rain, sand or excessive heat.
• Clean the set with a dry cloth. Don't use any
cleaning agents containing alcohol, ammonia,
benzene or abrasives as these may harm the set.
• Place the set on a hard and flat surface so that the
system does not tilt. Make sure there is good
ventilation to prevent the set overheating.
• The mechanical parts of the set contain self-
lubricating bearings and must not be oiled or
lubricated.
CD player and CD handling
• If the CD player cannot read CDs correctly, use a
cleaning CD to clean the lens before taking the set
to repair.
• The lens of the CD player should never be touched!
• Sudden changes in the surrounding temperature
can cause condensation on the lens of your CD
player. Playing a CD is then not possible. Do not
attempt to clean the lens but leave the set in a
warm environment until the moisture evaporates.
• Always close the CD door to avoid dust on the lens.
• To clean the CD, wipe in a straight line from the
centre towards the edge using a soft, lint-free
cloth. Do not use cleaning agents as they may
damage the disc.
• Never write on a CD or attach any stickers to it.