Toshiba TDP-MT400 Manuel du propriétaire - Page 15
Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Toshiba TDP-MT400. Toshiba TDP-MT400 23 pages. Dlp projector
Imprimer la page
Using the menus
You can call up on-screen menus, and conduct a number of adjustments and settings using
the operation buttons
on the control panel (main unit side) and remote control.
p.16
How to use the menus
The menu shown below is for operation instructions purposes and might differ from the
actual display.
1. Press the MENU button
2. Select a Category
Select a category by using
.
There are following four
categories:
p.29
Image adjustment menu
Display setting menu
p.30
Default setting menu
p.31
Status display menu
p.32
3. Adjustments & Settings
Press
Item
Adjustment/Setting Value
These marks signify the
items can be adjusted/set
by using
.
These marks signify the items can
be selected from the list by using
.
After an item is selected, apply it
by pressing
.
The figure shows displays given for operation instructions purposes. As the display
may differ depending on the item, use the following pages as a reference.
4. Back
Return button
Note
• Menu adjustments and settings are saved when the power is turned off via the ON/
STANDBY button. If the power cable is disconnected before this, or the power goes out,
then the data will not be saved.
Display the Setting display menu
Displays the current
adjustments and settings of
selected category.
Item shown with gray cannot
be adjusted with the current
input source.
to open the menu.
5. End
Press the MENU
button
The menu disappears.
This mark signfy that
there are options.
Press
to display a
list of options.
28
English
Français
Español
The image adjustment menu
Use this menu to adjust image-related items.
Items that can be adjusted are marked with "Yes", and those that cannot are marked with "No".
Item
Description
Contrast
Adjust the image contrast.
Lower
Brightness Adjust the brightness of the image.
Darker
Color
Adjust the color of the image.
Lighter
*1
Tint
Adjust the tint of the image color.
Reddish
Sharpness Adjust the sharpness of the image.
Softer
Noise
Set the function to reduce screen noise.
reduction
On (Enable)
Picture
Press
. Toggle the picture mode with
mode
/
.
Dynamic/Standard/Theater
R-level
Adjust red of the image color.
Less red
G-level
Adjust green of the image color.
Less green
B-level
Adjust blue of the image color.
Less blue
NTSC mode
*1
Set the black level with
US:
NTSC (US) mode
Japan: NTSC (JAPAN) mode
*1: [Tint] and [NTSC mode] can be displayed and adjusted only when the video signal is set to
[NTSC] and [NTSC4.43]. (NTSC mode is set to JAPAN when the language is set to Japanese. It is
set to US for other languages.)
Deutsch
Italiano
Português Svenska
Video
Computer Y/P
/P
B
R
S-video
Yes
Yes
Yes
Higher
Yes
Yes
Yes
Brighter
No
Yes
Yes
Deeper
No
No
Yes
Greenish
No
Yes
Yes
Sharper
No
Yes
Yes
Off (Disable)
Yes
Yes
Yes
Yes
Yes
Yes
More red
Yes
Yes
Yes
More green
Yes
Yes
Yes
More blue
/
button.
No
No
Yes
29
DVI
Yes
Yes
No
No
No
No
Yes
Yes
Yes
Yes
No