Toshiba TDP-MT500 Manuel du propriétaire - Page 8

Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Toshiba TDP-MT500. Toshiba TDP-MT500 40 pages. Home projector
Également pour Toshiba TDP-MT500 : Manuel du propriétaire (42 pages)

Toshiba TDP-MT500 Manuel du propriétaire
SELECTING THE POWER CORD
If your line voltage is 220 to 240 V, use one of the following types of cord.
Plug
configuration
Use a 5 A fuse which is approved by ASTA
or BSI to BSI362.
Always replace the fuse cover after changing
the fuse.

IMPORTANT PRECAUTIONS

Save Original Packing Materials
The original shipping carton and packing materials will come in handy if you ever have to ship
your projector. For maximum protection, repack the projector as it was originally packed at
the factory.
Avoid Volatile Liquid
Do not use volatile liquids, such as an insecticide, near the projector. Do not leave rubber or
plastic products touching the projector for a long time. They will leave marks on the finish. If
cleaning with a chemically saturated cloth, be sure to follow the product's precautions.
Moisture Condensation
Never operate this projector immediately after moving it from a cold location to a warm loca-
tion. When the projector is exposed to such a change in temperature, moisture may con-
dense on the crucial internal parts. To prevent the projector from possible damage, do not use
the projector for at least 2 hours when there is an extreme or sudden change in temperature.
Place and Manner of Installation
• Do not place in hot locations, such as near heating equipment. Doing so could cause
malfunction, and shorten the life of the projector.
• Avoid locations with oil or cigarette smoke. If exposed to these conditions, you could dirty
the projector's optical parts, shortening its life, and darkening the screen.
• Do not use at an angle of 15 degrees or more. Doing so could shorten the life of the lamp.
• If used at high altitudes, the projector may cease the operation even if used within the
rated temperature range. This is because the thinner air at high altitudes decreases the
internal cooling efficiency. Therefore, please lower the ambient temperature if using at high
altitudes.
• Contact your dealer for the ceiling mount bracket. As installation requires technical knowl-
edge and skill, be sure to ask your dealer for installation.
• When mounted on the ceiling, the product shall be installed by the dealer with the bracket
designed for this product. If you attempt to install the product by yourself, you may fall and
be injured or the product may fall causing injury.
8
Plug type
Line voltage
EURO
220 – 240 V
UK
220 – 240 V
Plug
configuration
Plug type
Australian
240 V
10 A
Switzerland 200 – 240 V
240 V
6 A
Line voltage