Toshiba TDP-S8UC01 Manuel du propriétaire - Page 24
Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Toshiba TDP-S8UC01. Toshiba TDP-S8UC01 45 pages. Data projector
Imprimer la page
■ Turning the power off
1
Press the ON/STANDBY button.
A message appears on the screen, confirming that you wish to shut off the power. This
message will disappear after a moment. (This operation is no longer valid after the
message disappears.)
2
Press the ON/STANDBY button again.
The screen turns off, but the internal cooling fan continues to operate for a short. Then
, the projector goes into standby mode.
A
During cooling ,the POWER indicator flashes.In this state,the power cannot be
A
turned back on.
If you are in a hurry, there is no problem with unplugging the power cord or turn-
ing off the main power switch in this state.
In standby mode
B
Note
• The projector consumes about 15W of power in standby. We recommend that you unplug
the power cord if you will not be using the projector for an extended period.
PRECAUTION
• If the power cord is unplugged before cooling is complete, give the lamp time (about 5
minutes) to cool before plugging it back in.
When cooling lamp
POWER
FLASH
24
After cooling complete
POWER
B
C