Toshiba TDP-S9 Manuel du propriétaire - Page 22

Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Toshiba TDP-S9. Toshiba TDP-S9 43 pages. 0.55" dmd dlp
Également pour Toshiba TDP-S9 : Spécifications des produits (1 pages), Manuel d'entretien (39 pages)

Imprimer la page

Note

• The start-up screen will disappear after a moment.

■ Turning the power off

Press the I/ ON/STANDBY button.

A message appears on the screen, confirming that you wish to shut off the power. This

message will disappear after a moment. (This operation is no longer valid after the

message disappears.)

Press the I/ ON/STANDBY button again.

The screen turns off, but the internal cooling fan continues to operate for a short while.

Then, the projector goes into standby mode.

When cooling lamp

(Green)

Flashing

During cooling, the LAMP indicator flashes. In this state, the power cannot be

turned back on.

After the LAMP indicator goes off, the cooling fan continues to operate for a

short while, in order to expel excess internal heat. If you are in a hurry, there is

no problem with unplugging the power cord or turning off the main power switch

in this state.

In standby mode

Note

• The projector consumes about 6W of power in standby. We recommend that you unplug the power

cord or turn off the main power switch if you will not be using the projector for an extended period.

PRECAUTION

• If the power cord is unplugged before cooling is complete, give the lamp time (about 5 minutes) to

cool before plugging it back in. If the lamp overheats, it may fail to light, and its lifetime will be

shortened.

During internal cooling

(Green)

After cooling complete

(Green)

Flashing