Toshiba TDP-T100 Manuel du propriétaire - Page 18

Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Toshiba TDP-T100. Toshiba TDP-T100 28 pages. Toshiba data projector owner's manual

Imprimer la page
Toshiba TDP-T100 Manuel du propriétaire

Using the menus

You can call up on-screen menus, and conduct a number of adjustments and settings using
the operation buttons
on the control panel (main unit side) and remote control.
p.16

■ How to use the menus

The menu shown below is for operation instructions purposes and might differ from the
actual display.
1. Press the MENU button
Display the Setting display menu.
2. Select a Category
Select a category by using
.
There are following four
categories:
Image adjustment menu
p.35
Display setting menu
p.37
Default setting menu
p.40
Status display menu
p.42
3. Adjustments & Settings
Press
Item
Adjustment/Setting Value
These marks signify
the items can be
adjusted/set by using
.
These marks signify the items can
be selected from the list by using
.
After an item is selected, apply it by
pressing
.
• The figure shows displays given for operation instructions purposes. As the display may differ depending on the item,
use the following pages as a reference.
• To return to previous item, press the RETURN button.
4. End
Press the MENU button.
(The menu disappears 30 seconds after the last operation.)
Displays the current
adjustments and
settings of selected
category.
Item shown with gray
cannot be adjusted with
the current input source.
or
to open the menu.
These marks
signify that
there are setting
screens. Press
or
display a list of
These marks
setting screens.
signify that there
are options.
Press
or
to display a list of
options.
* When no item is
changed, press
Toggle items with
.
Select items with
and press
.
Fix selection with
.
34

■ The image adjustment menu

Use this menu to set or adjust image-related items. Items that can be set or adjusted are
marked with "Yes", and those that cannot are marked with "No". (When an item is masked,
it indicates that you cannot select for the current input.)
Item
Contrast
Adjust the image contrast.
Brightness
Adjust the brightness of the image.
Color
Adjust the color of the image.
Sharpness
Adjust the sharpness of the image.
Noise
Set the function to reduce screen noise.
reduction
*1
Picture mode Press
1/2/3
1/2/3/4/5
/
R-level
Adjust red of the image color.
/
G-level
Adjust green of the image color.
to
B-level
Adjust blue of the image color.
NTSC mode
*2
Set the black level with
US
JAPAN
Auto setting
Automatically adjusts items such as the sampling
phase depending on the type of input signal.
.
Position
Press
adjust with
Adjust to eliminate flicker.
Adjust to eliminate periodic patterns and flickering
when many fine vertical lines appear on the screen.
Adjust the horizontal position of the image.
Description
Lower
Higher
Darker
Brighter
Lighter
Deeper
Softer
Sharper
On (Enable)
Off (Disable)
. Toggle the picture mode with
.
Less red
More red
Less green
More green
Less blue
More blue
.
: NTSC (US) mode
: NTSC (JAPAN) mode
then change mode using
and
.
Phase
Frequency
H-position
35
Computer Y/P
/P
Video S-video
B
R
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
Yes
Yes
Yes
No
Yes
Yes
Yes
No
Yes
Yes
Yes
No
Yes
Yes
Yes
Yes
No
No
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
No
Yes
Yes
Yes
No
No
No
Yes
No
No
No
Yes
No
No
No
Yes
No
No
No
Yes
No
No
No