Toshiba TDP-T30 Manuel du propriétaire - Page 17
Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Toshiba TDP-T30. Toshiba TDP-T30 23 pages. Data projector (xga)
Imprimer la page
Using the menu (Continued)
The display setting menu
Use this menu to set screen display-related items.
Item
Screen size
(Full): Display with 1024 × 768 dot resolution
(Thru): Display with sampling resolution (for computer input)
(Wide): Wide-screen display (for Video, S-video, and Y/P
Select one of the languages below to use for displaying the menu and messages
Language
[
: Enter setting mode]
English/Français/Deutsch/Italiano/Español/Português/
Svenska/Türkçe/
Screen to display when there is no input signal
Background
Icon
Display icons as function guides
Display start-up screen when power is turned on On
Start-up screen
Note
• If "Thru" is selected for screen size, portions exceeding the native resolution (1024 × 768
pixels) will not appear on the screen. Note that for RGB signals with clock frequency
140MHz or lower, all input pixel signals are sampled. However, if the clock speed is
higher than this, the RGB pixel signal is thinned before sampling.
Description
/P
B
[
:Selection]
[Apply:
]
/
/
/
(Logo)
(Blue)
On
Off
Off
32
The default setting menu
This menu shows placement status and other settings.
Item
Projection
mode
No signal
)
R
power off
Auto input
search
/
Power on
(Black)
Lamp power
[Note 1]
Fan mode
[Note 2]
Reset all
Notes
1: When Lamp power is set to Low, the screen becomes a little darker, but the cooling fan noise gets
quieter.
2: Setting [Fan mode] to [High] increases the cooling fan speed. Set this option to use the projector,
for example, at high altitude (over 1,500 meters above sea level).
Notes
• Note that in the event of a power outage but the power is restored afterwards, the projector
power will come on if Power on is set to Auto.
• When you turn off the projector even if Power on is set to Auto, you must press the ON/
STANDBY button to turn the power off.
Description
Sets projection mode in accordance with Placement Style.
(Standard)
(Rear)
Set the timer to wait for the power to be turned off after signal input stops.
Press
. Switch with
and
.
Off (not turned off)/1 min./5 min./10 min./30 min./60 min.
Set whether the input with signals is only selected or not.
Sets whether to turn on the power when the ON/STANDBY button is pressed
(Manual), or when the power cord is plugged in (Auto). Manual
Sets the lamp power.
Sets the cooling fan speed.
Press
.
Resets all adjustments and settings to their factory settings.
33
p.21
(Mounted
(Rear mounted
from ceiling)
from ceiling)
On
Off
Auto
Low
Standard
Standard
High
Yes
No