Philips FW P88 Manuel - Page 29

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Philips FW P88. Philips FW P88 32 pages. Mini hi-fi system with 3 cd changer
Également pour Philips FW P88 : Manuel de l'utilisateur (31 pages), Manuel de l'utilisateur (30 pages), Manuel de l'utilisateur (31 pages), Spécifications (2 pages), Spécifications (2 pages), Manuel (31 pages)

Imprimer la page

All manuals and user guides at all-guides.com

Tape Deck Operation

Recording or playback cannot be

made or there is a decrease in

audio level.

• Dirty tape heads, capstans or

pressure rollers.

™ See section on tape deck maintenance

(page 28).

• Magnetic build-up in the record/

playback head.

™ Use demagnetizing tape.

Tape deck door cannot open.

• Power failure or AC power plug

disconnect from the wall outlet

during tape playback.

™ Reconnect the AC power plug and

switch on the system again.

Recorded material sounds

strange.

• Tape was recorded in one of the

Dolby Pro Logic modes.

™ Switch off Dolby Pro Logic mode when

recording.

pg 01-28/P88/37-Eng

TROUBLESHOOTING

Remote control has no effect on

General

the system.

System does not react when any

• Wrong source is selected.

button is pressed.

™ Select the source (CD, TUNER, etc.)

• Electrostatic discharge

before pressing the function button

™ Press STANDBY ON to switch the

( É , í , ë , etc.).

system off. Remove the AC power plug

• The distance to the system is too

from the wall outlet, then reconnect

large.

the power plug and switch on the

™ Reduce the distance.

system again.

• Batteries are inserted incorrectly.

™ Insert the batteries with their polarities

No or poor sound.

(+/– signs) as indicated.

• Volume is not turned up.

• Batteries are exhausted.

™ Adjust VOLUME.

™ Replace the batteries.

• The headphones are connected.

™ Disconnect the headphones.

Timer is not working.

• Speakers are not connected or are

• Clock is not set.

connected wrongly.

™ Set the clock.

™ Check that the speakers are

• Timer is not switched on.

connected correctly.

™ Press TIMER ON/OFF to switch on the

™ Make sure the stripped speaker wire is

timer.

clamped.

• Recording is in progress.

™ Stop recording.

Reversed left and right sound.

• Speakers are connected wrongly.

Clock setting is erased.

™ Check the speaker connections and

• There was a power failure.

location.

™ Reset the clock.

Lack of bass sound or apparently

System displays features

imprecise physical location of

automatically; buttons flash

musical instruments.

continuously.

• Speakers are connected wrongly.

• Demonstration mode is switched

™ Check the speaker connection for

on.

proper phasing, colored/black wires to

™ Press and hold Ç (on the system) for

colored/black terminals.

five seconds to switch off the

demonstration.

There is a howling sound at the

external source.

• You hear feedback when you are

listening in AUX mode

™ Press AUX to select CDR/DVD mode.

All lighted buttons are not lit.

• Display is switch on in DIM 3 mode.

™ Press DIM until DIM OFF display

mode is shown.

3139 116 19711 (ENG)

2/16/00, 9:14 AM