Toshiba TDP-XP1U - XGA DLP Projector Manuel du propriétaire - Page 38
Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Toshiba TDP-XP1U - XGA DLP Projector. Toshiba TDP-XP1U - XGA DLP Projector 48 pages. Tdp-xp1u user's guide
Imprimer la page
Lamp replacement (Continued)
5
Mount the new lamp.
Align the orientation, press down the new lamp
until the bottom is reached, and lock in place using
the two lamp locking screws.
6
Replace the lamp cover.
Align the cover, and press it in, then tighten the
screws loosened in step
is no longer loose. (Be sure to replace the lamp
cover.)
7
Reset the lamp time.
See the lamp's manual for instructions on resetting
the lamp time.
Notes and Precautions
• The [Lamp time] item in the Status display menu indicates the time of lamp use (as a
rough guide).
p.35
• It is recommended that the lamp be replaced after 3,000 hours of use.When [Lamp
time] reaches 3,000 hours, a message will appear. (After 3,000 hours, the message will
appear when the power is first turned on after each 100 hour period of use.) This display
disappears when you press the
• Attach the lamp cover correctly so that it is not loose. If it is not attached correctly, the
projector may fail to be powered on or the lamp may fail to come on.
• Always replace the lamp with a new one.
• The lamp is made out of glass. Do not touch the glass surface with your bare hands,
bang it, or scratch it. (Dirt, jolts, scratches and the like could break the lamp.)
Used Lamps
This projector's lamps contain trace amounts of environmentally harmful inorganic mer-
cury. Be careful not to break used lamps, and dispose of them in accordance with local
regulations.
until the lamp cover
3
button.
38
5
2
1