MSI MS-98H2 Manuel - Page 28

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} MSI MS-98H2. MSI MS-98H2 42 pages. Qseven r 2.0 cpu module board
Également pour MSI MS-98H2 : Manuel (42 pages)

Imprimer la page

BIOS Setup

Advanced

▶ Full Screen Logo Display

This BIOS feature determines if the BIOS should hide the normal POST mes-

sages with the motherboard or system manufacturer's full-screen logo.

When it is enabled, the BIOS will display the full-screen logo during the boot-up

sequence, hiding normal POST messages.

When it is disabled, the BIOS will display the normal POST messages, instead

of the full-screen logo.

Please note that enabling this BIOS feature often adds 2-3 seconds of delay to

the booting sequence. This delay ensures that the logo is displayed for a suf-

ficient amount of time. Therefore, it is recommended that you disable this BIOS

feature for a faster boot-up time.

▶ Bootup NumLock State

This setting is to set the Num Lock status when the system is powered on. Setting

to [On] will turn on the Num Lock key when the system is powered on. Setting to

[Off] will allow users to use the arrow keys on the numeric keypad.

▶ Option ROM Messages

This item is used to determine the display mode when an optional ROM is ini-

tialized during POST. When set to [Force BIOS], the display mode used by AMI

BIOS is used. Select [Keep Current] if you want to use the display mode of op-

tional ROM.

3-6