PowerLite
1915/1925W
®
Quick Setup
Before using the projector, make sure you read the safety instructions in the
User's Guide on your projector CD.
Connect the projector
Choose from the following connections:
Computer Monitor Port
Connect a computer using the VGA cable that came with the projector.
Connect one end to the projector's Computer1 or Computer2 port, and the
other end to your computer's
switch it to external display. You can also connect an audio cable.
Computer USB Port
Connect a computer (Windows
2000 or later only) using the USB cable that
®
came with the projector.
Connect the square end of the USB cable to the projector's
USB
TypeB (square) port. Connect the flat end of the cable to any USB
port on your computer.
Follow the on-screen instructions to install the Epson USB Display software.
(You need to install the software only the first time you connect.) Then press
the USB button on the remote control.
Network (LAN)
Connect the projector to a wired network using an Ethernet
See "Project Over a Wired Network" on the back of this sheet for more
information.
To connect to a wireless network, see "Project Wirelessly" on the back of the
sheet for instructions.
monitor port. If you are using a notebook,
cable.
®
Video Player
Connect up to 5 video devices and use the remote control to switch between
them.
* These cables are optional.
Camera or USB Device
Connect a digital camera or other USB device to the projector's USB1 Type A
(flat) port.
Thumb drive
Digital camera
Connect an Epson Document Camera to the USB2
DC-06 document camera
If you connect a digital camera or USB storage device, you can use the
projector's EasyMP Slide Converter feature. See the Network and PC Free
Operation Guide on your projector CD.
For information on connecting an external monitor or external speakers, see
the User's Guide on your projector CD.
port.
Imprimer la page