MSI 1U12 Manuel de l'utilisateur - Page 31

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} MSI 1U12. MSI 1U12 40 pages.
Également pour MSI 1U12 : Manuel de l'utilisateur (40 pages)

Imprimer la page

5. Make sure the attached clips on the carrier grab onto the heatsink and firmly

secure the carrier, CPU and heatsink as one Processor Heatsink Module (PHM).

6. Remove the socket cover by squeezing the finger grips in, then flip 4 anti-tilt wires

on the heatsink to the unlocked position (inward) and place the PHM on top of the

bolster plate with the Pin 1 indicators aligned. Hold the PHM horizontally, carefully

lower down to engage PHM to bolster the plate's alignment pin.

7. Flip 4 anti-tilt wires to the locked position (outward) and make sure the latches of

the wires are firmly secure.

8. Tighten all screws on the PHM in diagonal sequences to secure the PHM to the

motherboard. (

Torque:

⚠

Important

∙

Whenever CPU is not installed, always protect your CPU socket pins with the plastic

cap covered.

∙

Do not touch the CPU socket pins to avoid damage.

∙

Read the CPU status in BIOS.

, 0.904 N·m = 9.2208 kgf·cm = 8 lbf·in

0.904 N·m

4 x anti-tilt wires

locked

)

CPU & Heatsink