Dimplex BN/60100 Series Instructions d'installation - Page 3

Parcourez en ligne ou téléchargez le pdf Instructions d'installation pour {nom_de_la_catégorie} Dimplex BN/60100 Series. Dimplex BN/60100 Series 3 pages. Baseboard heater

Imprimer la page

WIrING INStructIoNS

CAuTION: Do not bypass or eliminate thermal cutout from the circuit.
CAuTION: Check tightness of all electrical connections and wire nuts.
CAuTION: grounding connection is required. .
LEgEnD:
Thermal cutout
factorY WIrING
Thermal cutout
Heating Element
rigHT SiDE POWEr COnnECTiOn
!
Note: When control accessories are installed, use wiring diagram supplied with the accessory. Following are examples of wiring
diagrams with thermostat.
WiTH SingLE POLE THErMOSTaT
ground
L1
L2 or N
coNNectING multIPle lINear coNvectorS toGetHer
1367 Industrial Road
Cambridge ON Canada N1R 7G8
1-888-346-7539
www.dimplex.com
In keeping with our policy of continuous product improvement, we reserve the right to make changes without notice.
© 2011 Dimplex North America Limited
Heating element
L1
Line
L2 or N
ground
For Right hand side connection use same logic.
ground
L1
Line
L2 or N
ground
For Left hand side connection use same logic
gND
L1
L2 or N
Wire nut connection
Wire nut connection
ground
Nameplate
left SIde PoWer coNNectIoN
WiTH DOUBLE POLE THErMOSTaT
Load
ground
L1
L2 or N
3