CRS 5AHPR0 Manuel d'utilisation - Page 5
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} CRS 5AHPR0. CRS 5AHPR0 9 pages. Electronic crimping tool hps with external activation
Imprimer la pageBackground
The CRS 5AHPR0 High Power Crimping Tool can be adapted for use as a crimping
head in automatic equipment. This guide serves to outline the mechanical and electrical
connections necessary to do so.
The designer of the device incorporating this tool will
need to issue a new Declaration of Conformity after
doing a risk analysis and studying the DoC Supplied.
While the interface is straightforward, the designer
must to enough testing to verify that the tool is
suitable for the application intended.
Warnings
All of the warnings stated in the Instruction Manual apply to the tool when in remote
operation, but additional considerations apply.
When the crimper is activated remotely the pinch danger from the crimper jaws is
increased considerably. The purpose of remote activation is to allow the crimper to be
built into an automatic machine or used with special guarding, for example in a glove
box, in which case an additional risk assessment needs to be carried out.
A user with 2-hand access to the crimping head when remote operation is employed is
exposed to the action of the jaws during crimping and additional guarding should be
provided.
Description of 5AHPR0
1. The tool includes a 12 volt universal external
power supply with an IEC-320 connection for
a power cord in the country of use. The
supply carries appropriate markings for the
US and Canada, the European Union, -
Japan, China and Taiwan.
2. Interchangeable crimping heads are
available for most standard crimp caps and
seals.
3. The crimping action may be adjusted by a
keypad on top of the unit.
Mechanical Connection
There are two M3x.5 threaded inserts in the side of the crimping case. These inserts
should be used to attach the crimping tool to a mounting bracket or support.
Electronic Crimping Tool 5AHPR0
5