CRU WiebeTech Forensic ComboDock Manuel de l'utilisateur - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} CRU WiebeTech Forensic ComboDock. CRU WiebeTech Forensic ComboDock 6 pages.

Imprimer la page

CRU WiebeTech Forensic ComboDock User Manual

3 HPA/DCO HANDLING

The Forensic ComboDock will check to see if any HPAs (host protected areas) or DCOs (device configuration

overlays) are present after you have selected Write-Blocked or Read-Write mode on startup. If an HPA or DCO is

detected, the Forensic ComboDock will indicate that one has been found and ask what you want to do with it. Use

the Up and Down buttons to scroll through the options, shown below, and then press Enter to select an option.

DCO FOUND

Keep

DCO – Leaves the DCO in place

DCO – Permanently removes the DCO,

Remove

exposing any hidden data within that area

4 UPDATING FIRMWARE

CRU provides free firmware updates for the Forensic ComboDock through our Configurator application.

Download it here: www.cru-inc.com/support/software-downloads/configurator-software-download/

Setup Instructions

Connect the the provided USB micro-B cable to the "Admin" port on the Forensic ComboDock and connect the

other end to your computer. Then, turn on the Forensic ComboDock. Finally, open the Configurator application.

If your product is running outdated firmware, you will see a prompt asking you to update once you open the Con-

figurator application. Follow the instructions on the prompt to update the firmware.

5 FORENSIC SOFTWARE UTILITY

The Forensic ComboDock is compatible with CRU's Forensic Software Utility application. This software allows you

to perform a write-block test on your Forensic ComboDock, display details about attached drives, and save that

data to a file for easy inclusion in a case report.

Download it here: www.cru-inc.com/support/software-downloads/forensic-software-utility/

Setup Instructions

Connect the Forensic ComboDock to your computer with an attached drive as you normally would and turn the

Forensic ComboDock on. Then open the Forensic Software Utility.

For information on HPA/DCO handling, see Section 3.

Protecting Your Digital Assets

Keep

Remove HPA

so that data within it can be accessed

Remove HPA

HPA FOUND

HPA – Leaves the HPA in place

Temp – Temporarily bypasses the HPA

Perm – Permanently unhides the HPA