CRU Dataport DataPort 5 Manuel d'installation

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} CRU Dataport DataPort 5. CRU Dataport DataPort 5 2 pages. Serial ata, removable drive enclosures

Imprimer la page

DataPort 5 & 5+ Serial ATA Install Guide

Package Contents

1 - DataPort frame assembly

1 - DataPort carrier assembly

2 - Metal covers

4 - 6 x 32 x 3/8" flat-head screws for hard drive mounting

4 - M3 x 10mm Phillips pan-head screws for frame mounting

2 - Keys for lock

1 - Cover removal tool

Frame Installation

1. Rail Mount the Frame Assembly.

If the drive bay requires mounting rails, the rails are provided

by the case manufacturer. Install the mounting rails on the

DataPort frame according to the case manufacturer's instruc-

tions. Slide the frame into the case and secure it.

2. Direct Mount the Frame Assembly.

Slide the frame into an open 5.25" bay in the PC case. Use the

screws included with the DataPort 5 or 5+ to secure the frame

to the PC case with the side mount screw holes.

3. Final Frame Installation.

Connect the data and power cables. Connect an unused SATA

data cable to the DataPort frame data connector and the host

bus adapter. Connect an unused ATA power cable to the power

connector on the frame.

The frame installation is now complete.

Rugged, Reliable, Mobile, Secure

Installing a Hard Drive in a Carrier

1. Remove the covers of the DataPort 5 or 5+ carrier.

Use the provided cover removal tool to lift off the cover or slide

the covers off the back of the DataPort carrier.

2. Install the hard drive in your carrier.

Carefully connect the hard drive to the carrier board. Align

the hard drive with the side mount screw holes then use the

provided screws to secure the hard drive in position. For the

DataPort 5+ use a piece of adhesive tape to attach the TCCS

sensor (wire for regulating temperature control) to the middle

of the hard drive. Place the covers back on the DataPort 5 or 5+

carrier.

3. Insert the carrier in the frame assembly.

Slide the carrier into the frame and lock the carrier. The lock

on the DataPort 5 or 5+ serves as the power 'ON/OFF" switch.

After the lock is engaged the green LED will illuminate when

the computer is powered on.

1-800-260-9800